S4 sideskirts

[[]D[][]V[][]D]

I'm looking to get some OEM or close to oem S4 sides and rear bumper, anybody know where to look? Also, how do the s4 sides and the rs4 sides differ? pic request-s4 sides vs. rs4 sides??? thanks

[+decipher]

Real Rs4 sides will only look good with a widebodied car. The sides that companies like Rieger makes are more of a M3 replica/knock-off.

Here is my car with S4 sides

[[]D[][]V[][]D]

ya, s4 sides are better, where'd you get yours?

[DRA4]

Nice car, i like the taillights.

[+decipher]

Originally posted by []D[][]V[][]D
ya, s4 sides are better, where'd you get yours?

http://www.dadsauto.com/

They had a great deal from a wrecked S4 for me. You can get just the lower covers from the dealer for like ~$75-$80 and put them on with some well placed screws.

Dad's had all the brackets, screws and everything all ready to go. I choose to get all the OEM brackets, bolts and whatnot because I would rather mount them like OEM than any other way. Other people have used just the rear brackets and have had no problems, I am just really picky/anal.

I paid $450 for everything (door molding, skirts, all brackets, all screws/bolts, and other misc stuff. Also with an S4 rear valance).

[OverSpun]

Originally posted by +decipher
http://www.dadsauto.com/

They had a great deal from a wrecked S4 for me. You can get just the lower covers from the dealer for like ~$75-$80 and put them on with some well placed screws.

Dad's had all the brackets, screws and everything all ready to go. I choose to get all the OEM brackets, bolts and whatnot because I would rather mount them like OEM than any other way. Other people have used just the rear brackets and have had no problems, I am just really picky/anal.

I paid $450 for everything (door molding, skirts, all brackets, all screws/bolts, and other misc stuff. Also with an S4 rear valance).

is that including the S4 lower door trim?

[Silvant]

thats all the lower portions cost????
why does that seem so cheap?
also, anyone have some pics with a setup like that on an A4 with just the lower?
thanks... just wondering what i would need to use to make the door to skirt blend look smooth..

Originally posted by +decipher
http://www.dadsauto.com/

They had a great deal from a wrecked S4 for me. You can get just the lower covers from the dealer for like ~$75-$80 and put them on with some well placed screws.

Dad's had all the brackets, screws and everything all ready to go. I choose to get all the OEM brackets, bolts and whatnot because I would rather mount them like OEM than any other way. Other people have used just the rear brackets and have had no problems, I am just really picky/anal.

I paid $450 for everything (door molding, skirts, all brackets, all screws/bolts, and other misc stuff. Also with an S4 rear valance).

[A4 in SC]

Originally posted by Silvant
thats all the lower portions cost????
why does that seem so cheap?
also, anyone have some pics with a setup like that on an A4 with just the lower?
thanks... just wondering what i would need to use to make the door to skirt blend look smooth..

I agree. That sounds AWFULLY cheap to me. Especially where I've read of people spending over $1K on S4 sides. What gives? Any insight?

[MR VTEC]

dadsauto = junk yard

[[]D[][]V[][]D]

haha

[+decipher]

Originally posted by OverSpun
is that including the S4 lower door trim?

Originally posted by Silvant
thats all the lower portions cost????
why does that seem so cheap?

Originally posted by A4 in SC
I agree. That sounds AWFULLY cheap to me. Especially where I've read of people spending over $1K on S4 sides. What gives? Any insight?

Dad's is a Audi junkyard I believe. All the parts came off of a red wrecked S4. I don't remember who I talked to exactly, but if you search for some of my older posts I am sure it is there somewhere.

I recieved everything, including some parts that I didn't end up using. All the lower door trim parts (covers, backing strip, clips), both lower skirts (covers, mounting strip, front metal brackets, rear "mudflap" brackets, rear metal brackets, all the caps, bolts, washers & screws). The price included an S4 rear valance as well.

The parts were indeed used, but they were in perfect shape. I repainted them and installed them myself. The only thing I bought new were some self tapping screws to mount the front and rear metal brackets to the pinch molding under the car.

[Monchichi8]

Damn, that looks awesome!

[MR VTEC]

s/w erin @ dads he's cool!

[ASandman44]

i emailed them and they wanted $300 per side?

"The S4 rocker and door moldings are $300.00 per side."

Please call 1-800-321-3237 and ask for Tim for further assistance or to place an order.

DADS Auto Dismantling
5920 Outfall Cir
Sacramento, CA 95828
916-388-8350
916-388-8356 (fax)

mi0295t

[wa-gone]

i called them today and he told me 600.00 for the set w/ out shipping and there used.