Valve cover gasket?

[RedRocket]

Has anyone replaced this before? Is it hard?

[cbass]

Yeah, I did mine just about 3 weeks ago. It is super easy. Check this link on page 17 it shows you how to do it. The sealer that I use for my gaskets is just high temp weatherstrip sealer made by 3M, it works great. Post if you have any specific questions.

[MR VTEC]

i had my mechanic do it the gasket cost about $40+ at the dealer

[RedRocket]

Originally posted by cbass
Yeah, I did mine just about 3 weeks ago. It is super easy. Check this link on page 17 it shows you how to do it. The sealer that I use for my gaskets is just high temp weatherstrip sealer made by 3M, it works great. Post if you have any specific questions.

appreciated.

[Daft]

The gasket is $19 and the sealant is about $3. Other than that you will need some hex key sockets (5mm and 6mm if I recall). Since you have to remove the coil packs, you can do the plugs too.

[RedRocket]

Originally posted by turbo90awd
The gasket is $19 and the sealant is about $3. Other than that you will need some hex key sockets (5mm and 6mm if I recall). Since you have to remove the coil packs, you can do the plugs too.

Does the gasket require special sealant? or what kind would I need?