Question about H&R Race w/ Bilsteins

[D Piddy]

if i get this setup, amd i gonna need a camber correction kit? and about how much will it actually lower the car, the H&R site is a bit vague

[Oscar@tirerack]

Which car are you looking at doing this mods to? Year, make, and model.

[D Piddy]

2000 A4 1.8T Quattro manual

[Oscar@tirerack]

I would sujest buying one to have on hand while the springs are being installed. If the installer does do not need them, you can return them for credit. The Race springs will on avg drop the car 1.9" front, and 1.5" rear. The Sport ones 1.25F 1.0R

[D Piddy]

i think i mgiht go with the sport. still need a camber kit then?

[MikekiM]

No, the camber kit isn't particularly necessary for either the sport of race setups.
Kits are VERY expensive, and best to have installed when doing the suspension, if you decide you want the adjustable camber.

[EVIL-AUDI]

You will be fine with the race. You won't need the kit.

[DRA4]

I have race springs, you don't need the kit.

[RedRocket]

Originally posted by EVIL-AUDI
You will be fine with the race. You won't need the kit.

that's weird, I have that setup and i was told my the Aligner guy that I need to get a camber kit cause it would not align all the way.

hummmm.......I hope you're right though.

[LiLazngrl4o8]

i had race springs on mines, and granted the camber was off a bit, but i just did the usual tire rotations and everything is ok.. You'll need to get an alignment, but it'll still be off by a little bit.. just gotta decide if the small amount of negative camber is worth the money for a camber kit...