Newest cars to the family.....

[MKGIY]

Here they are.






Mike

[KkHoliday]

NICE!!! The Avant is super sick!

[tigabalm]

thats some serious widebody action going on the silver one!!! good luck parking it... (i crack myself up... j/k)

so whut other mods are done to them?

peace

[MKGIY]

The Avant is a Trinity T-Spec and the Wide body is a HPI RS4 Sport 2. They are stock for now, but they have beefie motors in them. I drift with these cars. I will try ot make a vid if i get a chance.

Mike

[JMG]

Originally posted by MKGIY
The Avant is a Trinity T-Spec and the Wide body is a HPI RS4 Sport 2. They are stock for now, but they have beefie motors in them. I drift with these cars. I will try ot make a vid if i get a chance.

Mike

What tires are you using to drift? Or are you wrapping them in electric tape?

Nice paint job on the bodies... it looks like you have the 200mm a4 widebody for the Nitro cars. They used to have the 190mm for the electric cars, but they are rare. I had the A4 body on my car too. BTW my NItro (Gas powered) HPI Nitro Racer is still up for sale!!! Click the link in my sig.

[EVIL-AUDI]

My god MKGIY is bored.

[MKGIY]

Originally posted by JMG
What tires are you using to drift? Or are you wrapping them in electric tape?

I have drift tires. They come with plastic rings that sit on the tires and it is like the car is on ice skates.

Mike

[Cup-a-Chow]

Where and how much are the drift tires? Got a link or something?

My Nitro RS4 has been collecting dust for 2 years. I need to take that thing out and drift that biatch!

[MKGIY]

Here you go. I really like them. Also you can use PVC from Home Depot.

http://www2.towerhobbies.com/cgi-bin...?&I=LXGMV9&P=0

Mike

[Cup-a-Chow]

Thanks for the link.

I have a ton of PVC laying around from aquarium installations. Should I pull the tire off the wheel and put the PVC on? I notice that the diameter of my wheel is 2".

Or, use slightly bigger PVC and put that around the tire? How would I get it to stay? Superglue it to the tire?!?!

[MKGIY]

If you just get 2" PVC it shoudl fit tightly over the rim alone. Check out www.rcdrift.com I found alot of info on that forum. Let me know how it goes.

Mike