Audizine - An Automotive Enthusiast Community

Page 1 of 2 12 LastLast
Results 1 to 40 of 42
  1. #1
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    couple new PICS of my car (BBK/HRE)

    Guest-only advertisement. Register or Log In now!

    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

  2. #2
    Veteran Member Four Rings
    Join Date
    Feb 11 2004
    AZ Member #
    83
    Location
    Walnut Creek, Ca

    how much you get the stoptechs for brian? looking good.
    - JoJo

  3. #3
    Veteran Member Four Rings hyperspeed's Avatar
    Join Date
    Feb 13 2004
    AZ Member #
    374
    Location
    Chino Hills, CA

    damn hot! love that 2nd pic..

  4. #4
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    Originally posted by kwan
    how much you get the stoptechs for brian? looking good.
    well, got a nice sponsorship deal.
    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

  5. #5
    Veteran Member Four Rings Axxis's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    29
    Location
    Miami, FL

    nice! digg it

  6. #6
    Veteran Member Four Rings BoostedA4tQ's Avatar
    Join Date
    May 24 2004
    AZ Member #
    2234
    Location
    Miami

    Hey candence if you dont mind can you help me out i have been looking for you for some time now. I have a few questions on your HREs can you please let me know what size and offset they are all around. I bought my HREs but they dont fit so im sending them back because the back rim is to wide but i want to make sure i do them right this time and still be able to clear BBK if you can please help me out i would appreciate it allot.

  7. #7
    Established Member Two Rings ThreeSixT's Avatar
    Join Date
    Feb 19 2004
    AZ Member #
    712
    Location
    San Diego

    lookin good B!

  8. #8
    Registered Member Four Rings G_A4's Avatar
    Join Date
    Jun 04 2004
    AZ Member #
    2381
    My Garage
    Audi A4 1.8T 2004
    Location
    Waianae, HI/NorCal

    looks really good. love the HRE's...
    Audi A4 1.8T
    GT2871R REVO
    [email protected] Race gas
    13.4@103MPH 91 Craptane
    HARDCORE

  9. #9
    Veteran Member Four Rings Crazy Quattro's Avatar
    Join Date
    Mar 05 2004
    AZ Member #
    1108
    My Garage
    2004 A4 1.8t
    Location
    chicago

    So hawt!!


    Hey where did you guys get the rope type thing that says your team name?

  10. #10
    Veteran Member Four Rings 1sicknickel's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    45
    My Garage
    My laundry, old records, tools
    Location
    Orange County

    Nice
    My Personal Photography and Cinematographer Website
    “Photography is not just a point and shoot process, it is a creative development that one seeks as an art form to capture moments in time†-Nickel 09

    07 Audi A4 Avant 2.0T Sold
    04 Audi A4 1.8T Sold

  11. #11
    Veteran Member Three Rings Nasty's Avatar
    Join Date
    Feb 13 2004
    AZ Member #
    391
    My Garage
    B8.5 S4/F80 M3/F31 330i/GO1 X3M40I
    Location
    OC

    Hotness!
    | NASTY |

  12. #12
    Forum Moderator Four Rings piaadoll's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    49
    My Garage
    2000 Grand Jeep Cherokee, 2016 S5
    Location
    San Jose, CA

    HA! this is the car that parked next to me at the ND charity show and gave my car a complex! HAHAHAAHA

    looking great brian!!!!!! HAWTness!
    Dawn - #49. I must be OG or something....
    2015 A3 2.0T Prestige | 2003 A4 1.8TQM

  13. #13
    Registered Member Three Rings
    Join Date
    May 28 2004
    AZ Member #
    2307
    My Garage
    00' VW MKIV GTI GLX
    Location
    PNW - 509 reppin' hard

    TOOOO MUCH...............MONEY.......CAN'T...COMPREHEND. ....:)
    MKIV GTI GLX

  14. #14
    Registered Member Two Rings AudiSyte's Avatar
    Join Date
    Jul 12 2004
    AZ Member #
    2762
    Location
    Strong Island, NY

    car looks real nice

  15. #15
    Established Member Two Rings
    Join Date
    Mar 07 2004
    AZ Member #
    1144
    Location
    SF

    baller!

  16. #16
    Registered Member Three Rings widm3r's Avatar
    Join Date
    May 02 2004
    AZ Member #
    1979
    Location
    LI, NY

    that is pimp!
    Widm3r

  17. #17
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    Thanks for all the compliments everyone!

    Boosted, I'm running 19x8.5 in the fronts and 19x9 in the rear with a 29 offset I believe (the most aggressive setup). I understand some people have had issues clearing BBKs with HREs...you definitely need to order from someone who knows HREs and offsets! Nobody knows HRE wheels better than Peter @ wheel experts. I highly reccommend him for your wheel needs/questions.

    Thanks again everyone!!
    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

  18. #18
    Registered Member Four Rings G_A4's Avatar
    Join Date
    Jun 04 2004
    AZ Member #
    2381
    My Garage
    Audi A4 1.8T 2004
    Location
    Waianae, HI/NorCal

    what's your offset in front.
    Audi A4 1.8T
    GT2871R REVO
    [email protected] Race gas
    13.4@103MPH 91 Craptane
    HARDCORE

  19. #19
    Veteran Member Four Rings bong2611's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    133
    My Garage
    2000 A6 AVANT, 2004 MBZ ML350
    Location
    Newark, Ca.

    schweeet wheels. Can you get a bigger lip on those?

  20. #20
    Veteran Member Four Rings BoostedA4tQ's Avatar
    Join Date
    May 24 2004
    AZ Member #
    2234
    Location
    Miami

    How big is the lip in the rear 2" or 2.5".... the front is fine but the rear is the issue i want to have a 9" width with the biggest lip possible but still be able to tuck tire in the fender... if you tell me your lip size i will knw already what to do...also if you can in the back of the rim is a build number if you can get me that i can give it to HRE so they can make it the same. I already have the rims but i need to send back the rears and i dont want to send it till i get an answer from you thanks.

  21. #21
    Registered Member Two Rings KkHoliday's Avatar
    Join Date
    Feb 22 2004
    AZ Member #
    801
    Location
    HollywoodLand

    Brian, I dont need to tell you your car is sick...I say it all the time! hahaha
    Success is going from failure to failure without loss of
    Enthusiasm..

  22. #22
    Veteran Member Four Rings Imperial's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    81
    Location
    Köln / Cologne - NRW

    Lookin sharp, as usual, Brian
    PLVS VLTRA

  23. #23
    Registered Member Two Rings
    Join Date
    May 31 2004
    AZ Member #
    2337
    Location
    cal

    Hi, cadance
    how are the remus exhaust? Are there just muffers? Have you heard a magnaflow muffer? I know you had the remus exhaust, I heard they are not much louder then stock, But I was wandering about the magnaflow because they are cheaper.

  24. #24
    Forum Moderator Four Rings piaadoll's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    49
    My Garage
    2000 Grand Jeep Cherokee, 2016 S5
    Location
    San Jose, CA

    i cant believe brian drives that car every day. nuts!

    Dawn - #49. I must be OG or something....
    2015 A3 2.0T Prestige | 2003 A4 1.8TQM

  25. #25
    Established Member Two Rings
    Join Date
    May 05 2004
    AZ Member #
    2030
    Location
    san diego

    Your car looked clean at HID san diego!!
    I got some pics of it as well as some of the other cars in your crew and I am posting them on my site in the show coverage section.

    Way to represent the b6's out there!!

  26. #26
    Established Member Two Rings
    Join Date
    May 05 2004
    AZ Member #
    2030
    Location
    san diego

    Originally posted by piaadoll
    i cant believe brian drives that car every day. nuts!

    Yeah--much respect for the daily driver status.

    My girl drives her car every day and it is an uphill battle to keep it clean so I know cadence has put in some work.

  27. #27
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    thanks again for all your guys' support, it's been a long journey.

    boosted, I'll have to get back to you with all the info. I believe it's considered a 2.5" lip in the rear. I'm not sure where they technically measure it from cause if you look at the wheel, the lip actually starts behind the face of the wheel, so I'm not sure if that part counts.

    Titan, I've gone through 3 exhausts and I'm happy with the Remus. The Remus was not much louder than stock before I did some custom piping. No exhaust system that is just a muffler change is much louder on our cars because we have a HUGE mid-muffler that restricts quite a bit. Remus is a beautiful, Austrian made exhaust system with nice 102mm/4" polished tips...I think it really goes great with the rear of our rather wide and bold car.

    Yeah, it's a tough daily to keep clean and in proper condition! E36, I'm actually considering an E36 M3 for a beater...that was my dream car back in the day! What's the price range on a used 95 these days?
    -Brian

    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

  28. #28
    Registered Member Two Rings
    Join Date
    Jun 05 2004
    AZ Member #
    2388
    Location
    Bay Area

    that second pic is awesome- apart from the stoptecs and hre's the lighting is awesome.

  29. #29
    Veteran Member Four Rings minira's Avatar
    Join Date
    Feb 13 2004
    AZ Member #
    409
    Location
    Jurupa Valley

    Originally posted by wombatt_0
    that second pic is awesome- apart from the stoptecs and hre's the lighting is awesome.
    real nice! that second pic is sic also.
    77 Porsche 911S
    13 RS5
    14 Porsche Panamera GTS
    16 Tundra PRO
    20 Sequoia PRO
    07 zx6r

  30. #30
    Veteran Member Four Rings BoostedA4tQ's Avatar
    Join Date
    May 24 2004
    AZ Member #
    2234
    Location
    Miami

    Candence thanks for all your help it is truly appreciated....Keep up the great work you have one of the nicest B6 out there...

  31. #31
    Veteran Member Four Rings buck's Avatar
    Join Date
    Feb 16 2004
    AZ Member #
    551
    My Garage
    '05 Tacoma & '03 Yamaha R6 & '14 Yamaha FZ-09
    Location
    Simcoe County ON, Canada

    FACK - that's one clean looking setup!

    Me likes it!
    APR 93 Octane Chip, VDO Boost Gauge, 710N, Koni C/O's, Carbonio CAI, High Flow Coconut air freshener.

    60% of the time, it works EVERY time.

  32. #32
    Veteran Member Three Rings quicksilver_S's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    67
    Location
    City that never sleeps

    Nice job Brian, Sponsorship is the way to go!! you prolly dont remember me but I met you at the ND show. We were the couple from NY.

  33. #33
    Established Member Two Rings
    Join Date
    May 05 2004
    AZ Member #
    2030
    Location
    san diego

    [QUOTE]Originally posted by CadenceX
    [B]thanks again for all your guys' support, it's been a long journey.

    boosted, I'll have to get back to you with all the info. I believe it's considered a 2.5" lip in the rear. I'm not sure where they technically measure it from cause if you look at the wheel, the lip actually starts behind the face of the wheel, so I'm not sure if that part counts.

    Titan, I've gone through 3 exhausts and I'm happy with the Remus. The Remus was not much louder than stock before I did some custom piping. No exhaust system that is just a muffler change is much louder on our cars because we have a HUGE mid-muffler that restricts quite a bit. Remus is a beautiful, Austrian made exhaust system with nice 102mm/4" polished tips...I think it really goes great with the rear of our rather wide and bold car.

    Yeah, it's a tough daily to keep clean and in proper condition! E36, I'm actually considering an E36 M3 for a beater...that was my dream car back in the day! What's the price range on a used 95 these days?
    -Brian

    I have seen the e36 m3's go for as low as 15,000 and up to 25,000 for one in immaculate condition with low miles.

    I have a show winning e36 m3 for sale--



    Too much dough to use it as your daily driver though..

  34. #34
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    Originally posted by quicksilver_S
    Nice job Brian, Sponsorship is the way to go!! you prolly dont remember me but I met you at the ND show. We were the couple from NY.
    hey whats up!? I don't exactly remember in all honesty, but I'm from the NYC too...2nd ave and 6th! Let me know next time you are back out here in cali, we'll meet up. =)
    brian
    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

  35. #35
    Registered Member Two Rings Vorsteiner's Avatar
    Join Date
    May 02 2004
    AZ Member #
    1983
    Location
    www.vorsteiner.com

    Let's see come pics of the hood.
    Vorstëiner USA
    www.Vorsteiner.com
    Aerodynamics | Carbon Fiber | Accessories

  36. #36
    Veteran Member Four Rings DLSJ5's Avatar
    Join Date
    Feb 12 2004
    AZ Member #
    364
    My Garage
    2005 M3 ZCP
    Location
    LA, CA

    Re: couple new PICS of my car (BBK/HRE)

    Originally posted by CadenceX

    Brian,

    Awesome!!!! I want those rims!!!! Few Questions, how much do they weight approx, where to go to purchase, they do fit behind stoptech's I see, how much approx, thanks for any info.

    Best,

    Drew

  37. #37
    Veteran Member Three Rings davidkae's Avatar
    Join Date
    Apr 20 2004
    AZ Member #
    1799
    Location
    Torrance

    Damn sick brian....looking good man....so whats next? lol

  38. #38
    Active Member Two Rings
    Join Date
    Feb 11 2004
    AZ Member #
    236
    Location
    Bay Area & QC, Philippines

    Brian!!! You never cease to amaze me. Mad Props YO!!!

    I also saw a glimpse of Andy's car.... OMG!!!!

    Mad props to TWC!!

  39. #39
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    thanks guys!

    drew, I ordered them through Peter @ wheelexperts.com. I'm not sure how much they weigh..I'm guessing 25 lbs or so for 19s? As you know, HREs are completely custom built wheels so they can be built with any offset or BBK clearance needed.

    David, hmm maybe more ICE goodies or more suede. =)

    Thanks Lloyd! yeah Andy's car is pretty sick...great combination of products on that ride. His Kinesis wheel barrells are fully polished and he's got Brembo Dual rear callipers on the rear! We'll see you soon buddy!
    -Brian
    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

  40. #40
    Senior Member Three Rings CadenceX's Avatar
    Join Date
    Feb 14 2004
    AZ Member #
    504
    Location
    Los Angeles, CA

    Originally posted by Vorsteiner
    Let's see come pics of the hood.
    I have some more on my digital camera, but the stupid card reader isn't working on my computer for some reason...

    www.bjoe.com
    '12 Audi A7
    996 Porsche C2 - Fabspeed Exhaust, headers, intake

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.