Does anyone know the price of the eurocode FMIC?

[1.8WAGA4]

I've search the website without finding any info on their FMIC....Also, are they still backordered?

[CO AVANT]

$800-850, call if you want to be on the waiting list...

[Villains]

It's $795. If you want to be on the waiting list, email [email protected] and state that you want to be placed on the waiting list for the FMIC.

[Saturnine]

Seems like everyone is wanting this FMIC!! Hahha..

[Villains]

Originally posted by Saturnine
Seems like everyone is wanting this FMIC!! Hahha..

David can't seem to keep them in stock. I have been waiting since March! But he is doing his best to get them made. They are great quality cores (Spearco) and mandrel bent piping. I got a chance to see and install one on Dejan's car.

[Saturnine]

Dejan got one??

Im a gonna have to check it out for sure!

[1.8WAGA4]

Good news, I asked the question to David@eurocode and he told me he should have everything in stock by the end of this week. I hope there is not to much people on the list....

[Jazzman]

Go for it Pat. I'll check how it turns out and then, get mine

Would you be in for a south shore KK meet next week?

[1sicknickel]

I want in. I love that intercooler look

[piaadoll]

i want one too cuz it's so pretty and would make my car look so mean..but it would be all for looks though.



those are tight and i really thought they were over a G!

[1.8WAGA4]

Originally posted by Jazzman
Go for it Pat. I'll check how it turns out and then, get mine

Would you be in for a south shore KK meet next week?

LOL, you want me to be the cobail....I'm still not decided. The first decision is to go or not with the E05, the rest will follow!

But concerning the KK meet, I'll be out for vacation between 16th of july until the 25th. After, no problem; I'll finish my last week of vacation at home. Who will organize the meet this time?

[FINA4]

I spoke with Dave from Ecode today and he said that the price for FMIC will be $895.00 and they should have those in stock in 3-4 weeks...

Has someone got different information about the pricing?? Villains?

[Villains]

Originally posted by FINA4
I spoke with Dave from Ecode today and he said that the price for FMIC will be $895.00 and they should have those in stock in 3-4 weeks...

Has someone got different information about the pricing?? Villains?

Well, David sets the price so his info would be the most accurate.

[neoprufrok]

Originally posted by Villains
David can't seem to keep them in stock. I have been waiting since March! But he is doing his best to get them made. They are great quality cores (Spearco) and mandrel bent piping. I got a chance to see and install one on Dejan's car.

Nice. From what I hear, less than 1psi pressure drop across the core too. Didn't hear much on cooling efficiency though. Any info on this Derrick?

[Villains]

Originally posted by neoprufrok
Nice. From what I hear, less than 1psi pressure drop across the core too. Didn't hear much on cooling efficiency though. Any info on this Derrick?

Since I don't have it installed yet, I can't really say for sure. I will be able to give you air intake temps with the dual side mounts and then again from the FMIC. That is the only way to see if there is much improvement.

[neoprufrok]

Originally posted by Villains
Since I don't have it installed yet, I can't really say for sure. I will be able to give you air intake temps with the dual side mounts and then again from the FMIC. That is the only way to see if there is much improvement.

I guess the other thing you could do is to do 3 straight dyno runs and see how much heat soak effects each setup. But we know how dyno-phobic we are these days... j/k man!

[FINA4]

Originally posted by neoprufrok
Nice. From what I hear, less than 1psi pressure drop across the core too. Didn't hear much on cooling efficiency though. Any info on this Derrick?

Dave@Ecode said, that tests that they have run so far, have showed no signs of engine running hotter or what so ever. They also made a test, where they run the engine from 1st gear to 4th gear, and with the stock SMIC the temparature was 80'C (176'F) but with their FMIC the teparature was only 52'C (125.6'F). That sound pretty good!

[Villains]

Originally posted by neoprufrok
I guess the other thing you could do is to do 3 straight dyno runs and see how much heat soak effects each setup. But we know how dyno-phobic we are these days... j/k man!

Rich,

I will do that, in fact I have planned that since I decided to get the FMIC. I will continue to post my dyno results for those who care. I just need to let the ones that don't go. I just have an issue with stupidity, but I have to learn to just let it go and not argue with every moron who never seems to be satisfied. If my posts help you out, then I am glad and am happy to do it. If it pisses some people off, too bad, because I know that I am helping some people. Just from my E05 posts alone, 8 people have called me and ordered kits. Four people already have them either installed or to be installed this week. The other 4 will get done this month. All 8 said that they went with this kit because of my posts so the way I see it, I am doing some people some good.