This is the e-mail below. Sounds pretty interesting. Dusty, you know anything about this since they are saying they are using Vishnu's dyno?
----------------------
Performance Opportunity
Brian Bilotti has arranged for Mihnea Cotet of Belgium to come to Visnu Tuning in Pleasanton on July 15th and 16th. If you're interested in having a custom tuned chip for your car on a 4 wheel dyno read on.
(If not we hope to see you at the Audi Corral at Infineon for the ALMS 7/17 and 18. See the club website to signup for tickets.)
Here's the story from Brian:
What: Custom Chip Tuning session
When: July 15/16
Where: Visnu Tuning, Pleasanton
Who's doing it: Mihnea Cotet from Belgium
Who? This guy is an Audi tuner, he uses 2 emulators and is able to do real-time tuning for your car.
This means you will have custom software that takes into account California crap gas, our humidity, our elevation, and our heat. It doesn't get any better.
For example: You can buy someone's chips (name withheld) that aren't custom and pay $600+ then pay another $300 for a second program, same, not custom.
Here, you are able to get it all for the same cost and made for YOUR car.
BTW, this is his business. He also does otherVAG products. He has proven to us that he can do it.
Case in point, Trevor Frank ran his software in the Open Track Challenge. This was after 14 itereations getting it just right. Oh btw, this was all done over the internet not even on a dyno!
This is an extreme example but just illustrates his capablities.
Cost Menu:
1 Program- $600
2 Programs- $900 (race gas)
2 Programs on a switchable chip- $1000
Dyno time- $100/hour per car- max 2 hrs
Race Gas- $5.50/gallon for 100 octane
$7.00/gallon for 116 octane
Lunch- $20 catered
If this sounds like an an opportunity you can't miss, contact Brian Bilotti at http://[email protected] to discuss details and secure a spot. Time is short so contact him immediately.
Here is additional information you'll need to address when you sign up. You can also sign up and pay by responding to http://[email protected]
We also need to know if you have a 3Bar Pressure Transducer. Again, most of you who have hotter software SHOULD have one but we need to know so please indicate in your reply. Here goes:
1 Program yes no
2 Program yes no
Switchable yes no
3Bar PT yes no
Lunch yes no
Please respond ASAP as we need to get $$ to reserve the dyno. First come first served, whoever gets their money in first gets the 15th, if we don't get enough participants for day 2, there will be NO day 2.
We also need to know if you have and EGT, if not then...
Do you have a stock down pipe? If not then
Do you have an aftermarket with the test port? If not then
Do you have 1 or 2 O2 bungs?
Whatever the case we will need to put an egt into your down pipe. We can place one either in the test port or replace the o2 with one. If you could make sure that you can remove either the test port plug, if you don't have one then the o2 sensor. This way we can quickly put in the egt and get you on the dyno.
PLEASE SEND this info to our Dyno tuning session specific email account and paypal address BELOW.
http://[email protected]
--
Reply With Quote
Bookmarks