19x8.5" Sportec Mono 10s, in good condition

[silva]

I am selling my 19"x8.5" wide Sportec mono 10 wheels in anthracite colour. They come with tires, but the buyer will need to purchase new ones. The tires are Yokohama AVS 235/35/19, and they all have bad camber wear. One of the tires has begun to show the nylon belts underneath the tread.

The wheels are in good condition, but two of them have a very light curb rash.

One of the marks is 1.5" long, and the other is more of a continuous scratch, a few inches in length. These can be easily repaired without the need to respray the entire wheel.

Both of these marks occured when my father was driving my car last summer. When switching lanes from a lane of old tarmac to a new fresh layer of tarmac ( a little step), the two right side wheels contacted the hot asphalt, creating these marks. They are present on the wheels in the blue A4 picture, but can't be seen due to the crappy quality of the camera.

At an additional cost of $200US, I can have the wheels proffessionaly re-sprayed in which ever colour you wish.

I am asking $1475Us, or best reasonable offer. Will ship within Canada and the US, at buyers expense.

I have now attached some pictures of each wheel, including close ups of the rash on two of them.

[AvanTTix]

just out of curiousity and b/c everyone is telling to up to 19s... what would be your price in CDN$ shipped to BC (V6E 1R8)...?

[silva]

It will cost me about $200 to have all four wheels shipped to BC. I will be able to sell them to you for $2100CDN, including the shipping.
I know a friend that has a large business account with Purolator, and he may be able to get me a cheaper rate, but I cannot guarantee that until I speak with him.

Thank you for your interest.

[AvanTTix]

hum... interesting... tempting...

Originally posted by silva
At an additional cost of $200US, I can have the wheels proffessionaly re-sprayed in which ever colour you wish.

what's the reputation of the shop...?

[silva]

Actually, I will be prepping the wheels for refinishing, and thus, they will be done properly.I will settle for nothing less than a perfect finish on the wheels. That should give you an idea of how they will look when done.

Also, I will take pictures once the wheels are refinished, so, if the potential buyer is not satisfied, I will refund the deposit I would require before refinishing these wheels.

Thank you for asking!

[Crisqo]

Silva,

I have a friend (local to you, Waterloo)....that might be interested in these...

PM me your number, and I can tell him to call you....
Or I can give his number to you...if you like..

[silva]

PM Sent!

[I am armed]

Does anyone know of any Sportec knockoffs?

[pismojeff]

Moven makes a knock off. Only 18" though. Search ebay for sportecs. There are usually some one there. Also "whitebutterorrage" has them on his rim.

edgeracing.com has some as well

[Audi_Sniper]

Originally posted by pismojeff
Moven makes a knock off. Only 18" though. Search ebay for sportecs. There are usually some one there. Also "whitebutterorrage" has them on his rim.

edgeracing.com has some as well

Bump for a real nice set of wheels. Man I wish this post would have came up about three months back

And yes I have a set of the Moven SP 10's that are on my ride. They are about as close as you can get to the real deal. The ones from Edge Racing are a little diffrent then the Sportecs or the Movens. But to be honest I would try and cough up the money for these if this is the style wheel you want. This is a good price in my book...

[AvanTTix]

don't bother... he sold them already...

[SoleMate]

Damn, wish I saw these before. I've been lookin for some