2011 s5 peelers on 2015 allroad fottament question.

[ShaneC]

9Jx19H2ET33

Found a pair of peelers for a good price. Know I will need spacers but just trying to see exactly what I would need before I pull the trigger. And if not messing with suspension what size tires could I use?

Not sure if this is the right place to ask this question so sorry if this is in the wrong spot.

Thanks in advance!

[Smac770]

8K allroad 19" wheels are 19x8.0 et26. et33 -> et26 = 7mm spacer
8K allroad 19" tires are 245/40r19 98Y XL.

Using Michelin PSAS4 as an example (seems they don't make the CC2 in this size), 245/40r19 is supported on 8.0"-9.5" wheel width. The measuring rim width for 245/40r19 is 8.5". 1" wide wheel is going to give you about .4" wider tire cross section (9.6 on 8.0; 10.0 on 9.0). So if you don't want the outer tire face any further out, you might even not run a spacer at all.

[Nano909]

I used S5 peelers with stock suspension and no issues.

[Matt Devo]

255/40/19 tires and 15mm spacers all around. 245's will be a little rounded (not quite stretched) on a 9" wide wheel

[ShaneC]

Thanks so much everyone! Picked them up today.

[ShaneC]

And matt I just have to start looking at your previous posts. Whenever I have an allroad question you always have the answer I'm looking for. BTW the aftermarket brushed aluminum mirror caps you suggested fit perfectly.

[Matt Devo]

And matt I just have to start looking at your previous posts. Whenever I have an allroad question you always have the answer I'm looking for. BTW the aftermarket brushed aluminum mirror caps you suggested fit perfectly.

glad to hear :) I haven't posted a ton on here for Allroad stuff (not like I did for my B6/B7s), as the community is largely on FB and Discord now, for better or worse