Audizine - An Automotive Enthusiast Community

Results 1 to 9 of 9

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Active Member One Ring
    Join Date
    Aug 18 2019
    AZ Member #
    515609
    Location
    Utah

    B6 A4 Performance Parts

    *Updated List*
    Clearing out the garage. All parts are new and never installed unless noted. If you see something you need or want, give me an offer. Everything is best offer. You can package parts together for a discount. Looking to move things quickly. Parts are as follows:
    -eBay GT2871R Journal Bearing Turbo $100
    -Engine gasket set $100
    -Maxpeeding Forged H beam rods, 19mm wristpin, ARP bolts $550
    -Wiseco forged pistons, 19mm wristpin $700
    -Vent mount duel gauge pod 52mm $50
    -Prosport boost gauge 52mm $85
    -Prosport wideband air and fuel gauge kit 52mm $200
    -ARP head stud kit $250
    -ECS Tuning RA4 flywheel, machined for a B7 RS4 clutch $400
    -RS4 clutch kit, comes with pilot bearing, throw out bearing, hardware $170
    -Oil pump, chain, and tensioner $125
    -Timing belt kit, comes with tensioner, tensioner pulley, water pump $230
    -Bosch 550cc injectors with harness adapters $450
    -CX Racing aluminum cold air intake with heat shield $250
    -Stainless steel turbo exhaust adapter, goes from turbo to a v band $30
    -Aluminum injector cups $50
    -AEM ethanol 340LPH fuel pump kit with an 034 motorsports billet adapter $230
    -B6 S4 front and rear rotors with pads, drilled and slotted, black zinc coating $450
    -Used FSI crank for stroker build for manual transmission $350
    -B6 S4 stainless braided brake lines front and rear, ECS Tuning brand $140


    I can add more photos upon request since I'm limited to how many I can upload here.
    Thanks for looking.
    Attached Images
    Last edited by AUDIMAN5000; 04-28-2025 at 10:21 PM.

  2. #2
    Active Member One Ring
    Join Date
    Aug 18 2019
    AZ Member #
    515609
    Location
    Utah

    More pictures
    Attached Images

  3. #3
    Established Member Two Rings
    Join Date
    Mar 12 2013
    AZ Member #
    111196
    Location
    Houston, Texas

    Can you throw up a pic of the steering wheel?

  4. #4
    Active Member One Ring
    Join Date
    Aug 18 2019
    AZ Member #
    515609
    Location
    Utah

    Quote Originally Posted by ye1low View Post
    Can you throw up a pic of the steering wheel?
    Here you go.
    Attached Images

  5. #5
    Senior Member Three Rings
    Join Date
    Sep 10 2021
    AZ Member #
    625673
    Location
    Pennsylvania

    DM sent. Let me know what you think.

  6. #6
    Active Member One Ring
    Join Date
    Aug 18 2019
    AZ Member #
    515609
    Location
    Utah

    Quote Originally Posted by Mike Tries View Post
    DM sent. Let me know what you think.
    Reply sent.

  7. #7
    Active Member One Ring
    Join Date
    Aug 18 2019
    AZ Member #
    515609
    Location
    Utah

    Updated list

  8. #8
    Active Member One Ring
    Join Date
    Apr 24 2025
    AZ Member #
    1006229
    Location
    Washington

    Quote Originally Posted by AUDIMAN5000 View Post
    *Updated List*
    Clearing out the garage. All parts are new and never installed unless noted. If you see something you need or want, give me an offer. Everything is best offer. You can package parts together for a discount. Looking to move things quickly. Parts are as follows:
    -eBay GT2871R Journal Bearing Turbo $100
    -Engine gasket set $100
    -Maxpeeding Forged H beam rods, 19mm wristpin, ARP bolts $550
    -Wiseco forged pistons, 19mm wristpin $700
    -Vent mount duel gauge pod 52mm $50
    -Prosport boost gauge 52mm $85
    -Prosport wideband air and fuel gauge kit 52mm $200
    -ARP head stud kit $250
    -ECS Tuning RA4 flywheel, machined for a B7 RS4 clutch $400
    -RS4 clutch kit, comes with pilot bearing, throw out bearing, hardware $170
    -Oil pump, chain, and tensioner $125
    -Timing belt kit, comes with tensioner, tensioner pulley, water pump $230
    -Bosch 550cc injectors with harness adapters $450
    -CX Racing aluminum cold air intake with heat shield $250
    -Stainless steel turbo exhaust adapter, goes from turbo to a v band $30
    -Aluminum injector cups $50
    -AEM ethanol 340LPH fuel pump kit with an 034 motorsports billet adapter $230
    -B6 S4 front and rear rotors with pads, drilled and slotted, black zinc coating $450
    -Used FSI crank for stroker build for manual transmission $350
    -B6 S4 stainless braided brake lines front and rear, ECS Tuning brand $140


    I can add more photos upon request since I'm limited to how many I can upload here.
    Thanks for looking.
    You don’t happen to have an exhaust, do you?

  9. #9
    Active Member One Ring
    Join Date
    Aug 18 2019
    AZ Member #
    515609
    Location
    Utah

    Quote Originally Posted by MidRebuilder View Post
    You don’t happen to have an exhaust, do you?
    Not one that I'm willing to sell right now.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.