Audizine - An Automotive Enthusiast Community

Results 1 to 4 of 4
  1. #1
    Veteran Member Four Rings BlazinB5's Avatar
    Join Date
    Nov 12 2010
    AZ Member #
    66938
    Location
    Stillwater, MN

    Question 2.0T How to verify faulty PCV? Guides available for replacement?

    Guest-only advertisement. Register or Log In now!
    Girlfriends C7 A6 2.0T is burning oil and has 200,000 miles, so I was thinking of checking that out before anything. It only recently started consuming oil, and isn't leaking it.

    I think I heard you could do something with removing the oil cap and that there should be suction (vacuum) while it idle. Then I saw a clip on YouTube with a guy verifying it by removing one of the tubes coming from the PCV and putting his finger in the hole, paying attention to how the car idles. The info from YouTube (or me) could be wrong, so it would be awesome if others could chime in. Appreciate the help!

    https://www.youtube.com/watch?v=Q3MmILk9A8M

    https://youtu.be/FTpxAcMLVNc?si=EPQ1B-X1IbXOjjUA

    Edit: I tried searching "PCV" using the "Advanced Search" option and it ironically returns "Sorry - no matches. Please try some different terms."
    Last edited by BlazinB5; 04-08-2025 at 01:40 PM.
    2001 Allroad 2.7T
    2000 A6 4.2 (parted out)
    2003 A4 1.8T (sold)
    2002 A4 1.8T (sold)
    2001 A4 1.8T (sold)
    2001 A4 2.8 (sold)

  2. #2
    Veteran Member Three Rings Botbasher's Avatar
    Join Date
    Jul 26 2018
    AZ Member #
    423110
    My Garage
    2014 S6 "Elsa" - Mk 6 JSW - Scratch Built Lotus 7 Replica
    Location
    Humidity, NC

    The first video is looking at an FSi... the second at a TFSi... so make sure you are following the guidelines for your specific motor.

    Otherwise, both "diagnostics" are good enough to start but remember that cars are subjective. I have had good vacuum that'll just make the cap dance and one I couldn't pull it without force. Both good. It's a tool... not an absolute.

    You can pull the covers off the diaphragm and look to see if it's physically damaged to confirm.

    If you have a suspicion that your PCV is bad on a 2.0t... fix it ASAP!!! OEM RMS's are very weak and it'll blow it out in short order. Just had to redo my brothers that went bad in the span of 2000 miles! Don't ignore it!!

    Good Luck!

    KS

  3. #3
    Veteran Member Three Rings Botbasher's Avatar
    Join Date
    Jul 26 2018
    AZ Member #
    423110
    My Garage
    2014 S6 "Elsa" - Mk 6 JSW - Scratch Built Lotus 7 Replica
    Location
    Humidity, NC

    Quote Originally Posted by BlazinB5 View Post
    Edit: I tried searching "PCV" using the "Advanced Search" option and it ironically returns "Sorry - no matches. Please try some different terms."
    Yeah... search engines do not like 3 letter searches.

    Cheers,

    KS

  4. #4
    Junior Member Two Rings
    Join Date
    Nov 05 2021
    AZ Member #
    638273
    My Garage
    2017 Q7 PP 2.0L
    Location
    Houston Texas

    So, search the Audi A4 B8 or B9 forums (too bad you didn't tell us the year or engine model) they have tons of 2.0L there.

    or in youtube search for "caeb pcv replacement audi" or audi calls it an "oil separator". I've DIY'd a few years back, easy job...
    2013 A6 Quatro PP 2.0L
    2017 Q7 PP 2.0L

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.