Audizine - An Automotive Enthusiast Community

Results 1 to 5 of 5
  1. #1
    Junior Member One Ring
    Join Date
    Mar 05 2025
    AZ Member #
    1003231
    Location
    Pasco 99301

    Rear heated seats

    Guest-only advertisement. Register or Log In now!
    Can some tell me how to swap the rear heated seats to another B7 with no heated seats ? Is it possible ?

    Sent from my SM-A156U using Audizine Forum mobile app

  2. #2
    Junior Member One Ring
    Join Date
    Mar 05 2025
    AZ Member #
    1003231
    Location
    Pasco 99301

    I Pulled the engine to Rebuilt it because my balance shaft failed

    https://youtu.be/bTX99n7-uvs?si=rqRfuiVGVL8oXsiL

    So I bought a donor car 2007 a4 b7 2.0t Quattro A/T & used the block ONLY & bought a new head & rebuilt it with new valves & springs ect..So.... 2 weeks later. I was able to finish it . It cranked up right away.
    no codes . She was perfect Problem is the guy you seen the video. he was helping me rebuild it. I know very little about installing piston rings & honing the cylinders. But we ended up having our differences & we no longer talk or get along. But some how my key goes missing I know he took it from my house & I can't prove it so I switched out the doors from the donor & got a new ignition switch from audi dealer & it won't crank . SAFE" I'm stuck. I think the guy who did my ignition switch didnt do it right . I know what my car has. I replaced & checked everything. it's been sitting outside for over a year. So now im on my 2nd donor car. Bought another B7 A/T to swap Engine & Transmission now Im doing a swap because my car wouldn't crank.

    Sent from my SM-A156U using Audizine Forum mobile app

  3. #3
    Veteran Member Four Rings Jayz691's Avatar
    Join Date
    Jan 21 2018
    AZ Member #
    412818
    My Garage
    2005 Subaru Legacy GT
    Location
    frackville, pa US

    It won't crank, or won't start? Should be pretty straight forward, after programming the new keys. Safe means an immo issue.

    Sent from my CPH2611 using Audizine Forum mobile app

  4. #4
    Junior Member One Ring
    Join Date
    Mar 05 2025
    AZ Member #
    1003231
    Location
    Pasco 99301

    Dash lit up but no crank . I called a lock Smith & he said he couldn't get a read or login to my cars ecu . I also towed it to a Europe mechanic shop & they couldn't figure it out either.

    Anyways I'm almost done with swap, I just need to switch the front axel's & the pedals . Do you know how do I get access to the wiring harness that goes to the pedals " clutch safety switch break switch & reverse lights " ? Or an easier way ? I think I've heard others cut up& modify their A/T harness . Right?

    Sent from my SM-A156U using Audizine Forum mobile app

  5. #5
    Junior Member One Ring
    Join Date
    Mar 05 2025
    AZ Member #
    1003231
    Location
    Pasco 99301

    Here are the are the codes that I was able to pull up from the "no crank no start issue"

    Sent from my SM-A156U using Audizine Forum mobile app

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.