Printable View
Black AMS Twin Turbo Audi R8 V10 w/ HRE Wheels Arrives at GMG Racing for Suspension Upgrages
https://farm3.staticflickr.com/2923/...544827f0_h.jpg
https://farm4.staticflickr.com/3904/...80493c4c_h.jpg
https://farm4.staticflickr.com/3904/...1ab88cee_h.jpg
https://farm6.staticflickr.com/5555/...c8f4102c_h.jpg
https://farm4.staticflickr.com/3899/...ee63853b_h.jpg
Stay tuned for updates!!!
Did you guys assemble this or did AMS?
Pat,
The kit was installed by SP Engineering but we can also install kits for AMS at GMG.
We installed the following parts:
GMG Audi R8 16 Piece Spherical Bearing Kit
https://farm4.staticflickr.com/3725/...eb906ac4_h.jpg
Direct replacement part for the rubber bushings, the GMG Audi R8 Monoball Bearing Kit will significantly improve the handling and feedback from the vehicle. They are a must for track cars and are also suitable for street use with minimal road noise being transmitted to cabin.
https://farm4.staticflickr.com/3854/...89eaca43_h.jpg
GMG Spherical Bearing vs OEM Rubber Bushings
https://farm6.staticflickr.com/5558/...2a9cf750_h.jpg
GMG Spherical Bearing Installed on Control Arm
GMG Audi R8 Front & Rear Bump & Toe Steer Kit
https://farm6.staticflickr.com/5481/...58bfaf14_h.jpg
https://farm4.staticflickr.com/3802/...c34e0da9_h.jpg
Developed and proven on our GMG Racing fleet of Audi GMG R8 LMS GT3 R16 race cars, the GMG bump & toe steer will minimize bump-steer and gives you the toe adjustment needed that is not available with stock links. This kit is highly recommended for Audi R8s that have been lowered with aftermarket lowering springs or a full coilover suspension kit.
A car that bump-steers requires constant steering adjustment to maintain a steady trajectory over uneven surfaces. The result is an annoying steering wheel jerk whenever you go over any bumps in the road, and bump steer becomes more severe with lowered ride height.
Our utilizes the highest quality links and hardware on the market. The links themselves are CNC machined out of 6061 aluminum and are anodized with our signature GMG Racing blue finish to protect against the elements. The rod ends & spherical bearings are made out of zine plated low carbon steel and hard chrome plated steel.
International Shipping is Available and Wholesale Inquiries are Welcomed
Professional installation is available at our facilities in Orange County, California.
GMG products are also available worldwide through our growing dealer network in North America, Latin America, Europe, Middle East, Africa, Asia and Pacific: http://www.gmgracing.com/dealers/
For all questions and inquiries, please email [email protected] or [email protected]
For more information about GMG products and services, please visit us at www.gmgracing.com and check out our image galleries:
GMG Exhaust Gallery: https://www.flickr.com/photos/gmgrac...7644709932366/
GMG Roll Bar Gallery: https://www.flickr.com/photos/gmgrac...7646061261975/
GMG Suspension Gallery:https://www.flickr.com/photos/gmgrac...7644350210268/
GMG Wheel Gallery: https://www.flickr.com/photos/gmgrac...7645687738820/