B6/B7 A4/S4: CityLight with Fog Mod

I know this is a repost but I wanted to put my spin on it...
First of all, HUGE props to "FatAuto" for figuring this out. For reference >>> FatAuto's AW Link

Here's how I did it and I've just include lotso pics for people who like pics [:)]

1. Identify wires (Position #1 & #2) on the light switch harness
http://www.audizine.com/gallery/data...66DSC05045.JPG

2. Cut Wire #2. Allow for ample wire for step #3 & #4 below.
http://www.audizine.com/gallery/data...66DSC05046.JPG

3. Strip Wire #2.
http://www.audizine.com/gallery/data...66DSC05047.JPG

4. Crimp on Male Wire Tab Connector to #2 Wire.
http://www.audizine.com/gallery/data...66DSC05048.JPG

5. Use these style wire tap for a fool-proof tap. The best wire taps money can buy, IMHO.
http://www.audizine.com/gallery/data...66DSC05049.JPG

6. Crimp on Wire Tap onto Wire #1. Crimp far enough downstream to allow for the ease of Step #7 below.
FYI, I barely left enough room for mine, but for you guys, go further downstream (See Step #7).
http://www.audizine.com/gallery/data...66DSC05050.JPG

7. Connect up Male Wire Tab to Wire Tap & Tape raw end of Wire #2.
http://www.audizine.com/gallery/data...66DSC05051.JPG

8. Done, in 5 minutes time. Fogs w/CityLights Mod...
Whooot !!!!
http://www.audizine.com/gallery/data...66DSC05053.JPG


Original Thread w/ Discussion: http://www.audizine.com/forum/showthread.php?t=124446