ShadowCatEXE
03-08-2025, 05:59 PM
Hi guys, I haven't seen many posts on this, so hopefully someone can help out. My lower rear diff mount has decided to take off its hat, causing the bushing to lift up and allow some significant slop and thudding in the drive train (see images below).
I'm looking to see if there's any write up or advice on replacing this? There's obviously no room to replace it (from what I can see) with the diff in the way, so I assume that needs to come out. I can probably use the mount inserts to reduce the drive train slop, but since the outer aluminum shell is destroyed (not the rubber), it likely won't provide much support, if at all.
https://i.imgur.com/Ri2qxxY.jpeg
https://i.imgur.com/BxezrYY.jpeg
Any help is appreciated!
I'm looking to see if there's any write up or advice on replacing this? There's obviously no room to replace it (from what I can see) with the diff in the way, so I assume that needs to come out. I can probably use the mount inserts to reduce the drive train slop, but since the outer aluminum shell is destroyed (not the rubber), it likely won't provide much support, if at all.
https://i.imgur.com/Ri2qxxY.jpeg
https://i.imgur.com/BxezrYY.jpeg
Any help is appreciated!