Dondbg
09-29-2024, 10:09 PM
https://uploads.tapatalk-cdn.com/20240929/fd1f2f32d7a2fe48e2c3b5244c95877d.jpg
Before I pull the engine and trans, I want to be 100% sure of the faulty part.
Description of the issue: car starts and shift nicely with no issues, after extended drive, the yellow gearbox malfunction shows in dash, still no change in shifting and driving, as soon as I come to a stop, the dash display the gears in N and shows the emergency brake as engaged (I think this is a safety feature so the car will not roll). To get out of the situation, need to shut the engine, move selector to P and start it, and then drive and could happen again.
There are two spots where the selector position is checked, one under the gear boot and one inside the transmission (happy to be corrected here)
Here are the codes I’m getting
8052 - Selector Lever Sensor
P179E 00 (0361 - Electrical Malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Mileage: 154548 km
Date: 2010.01.22
Time: 01:41:20
8053 - Selector Lever Sensor
P179E 00 [036] - Electrical Malfunction
Intermittent - Not Contirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Reset counter: 40
Mileage: 154548 km
Date: 2010.01.22
8947 - Selector Lever Sensor
P179F 00 [100] - Malfunction
Intermittent - Not Confirmed • Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Mileage: 154548 km
This what I think I need to do and what I think is faulty.
https://youtube.com/shorts/T28cSO8IoN8?si=AAQa602Wz2VKzbsG
Please share your ideas if you been there / done that. Thanks.
Before I pull the engine and trans, I want to be 100% sure of the faulty part.
Description of the issue: car starts and shift nicely with no issues, after extended drive, the yellow gearbox malfunction shows in dash, still no change in shifting and driving, as soon as I come to a stop, the dash display the gears in N and shows the emergency brake as engaged (I think this is a safety feature so the car will not roll). To get out of the situation, need to shut the engine, move selector to P and start it, and then drive and could happen again.
There are two spots where the selector position is checked, one under the gear boot and one inside the transmission (happy to be corrected here)
Here are the codes I’m getting
8052 - Selector Lever Sensor
P179E 00 (0361 - Electrical Malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Mileage: 154548 km
Date: 2010.01.22
Time: 01:41:20
8053 - Selector Lever Sensor
P179E 00 [036] - Electrical Malfunction
Intermittent - Not Contirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Reset counter: 40
Mileage: 154548 km
Date: 2010.01.22
8947 - Selector Lever Sensor
P179F 00 [100] - Malfunction
Intermittent - Not Confirmed • Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Mileage: 154548 km
This what I think I need to do and what I think is faulty.
https://youtube.com/shorts/T28cSO8IoN8?si=AAQa602Wz2VKzbsG
Please share your ideas if you been there / done that. Thanks.