S5 Rotors with B12 Pro Kit

[S4Aviator]

I've seen a handful of people running this setup, but also see a lot of conflicting reports on whether or not they actually fit well.

Already have the B12 Pro Kit installed, considering the 19x9 ET33 S5 rotors, just want to nail down whether or not they'll rub. Anyone running this setup that can offer some unfiltered insight?

[VeeDubbinJetta]

I run the B12 kit with S5 peelers, so same specs as rotors with 255/35/19 Firestone Indy500’s and have only ever rubbed if I am taking a turn and hit a good bump or dip in the road.

[Iceman502]

I have 255/35/19 continentals on ET33 rotors with 12mm spacers front/15mm rear - installed the B12 kit this past weekend. I only drove it back to Raleigh (2 hours on the interstate and backroads) before flying out for work but didn't have any issues. Wheel gap is perfect to me and I find the ride to be more comfortable than the original suspension that came off at 64k miles.

[TyBushS4]

I have the B12 kit on my car and just test-fit some ET 33 S5 Rotors. I haven't driven on them yet, but I don't see any reason they would rub. The concavity is awesome when compared to the stock S4 wheels, however I think the offset is a little too aggressive for my liking.