P2279 & P0068 code after throttle body replacement

[BlakeBro]

Hey guys i have a 2010 S4 with 162k miles and I got a CEL for a throttle position sensor, so i changed the throttle body (NON OEM), had the adaptation and after about 5 minutes i get the P2279 & P0068 codes and they wont go away.
Only other issue is extremely small oil drip from oil drain plug.

The craziest thing is it drives perfectly fine with no hesitation, whistling, rough idle, misfiring, etc.

I had these replaced to try and fix it

PCV/Oil separator
Thermostat
Water pump
Intake manifold gaskets
Miscellaneous o-rings
Vacuum line from intake to pcv/oil separator
All three MAP Sensors
Fuel injectors with seals
Battery

My only suspicion is the throttle body i got is defective in a way but is that enough to throw those kinda codes?

Any insight would be nice thanks.




Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)

[nosport]

Non OEM TB
What exactly TB u installed?

Sent from my SM-G990B using Audizine Forum mobile app (http://r.tapatalk.com/byo?rid=87676)

[BlakeBro]

Non OEM TB
What exactly TB u installed?

Sent from my SM-G990B using Audizine Forum mobile app (http://r.tapatalk.com/byo?rid=87676)

I believe the brand was SKP


Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)