PDA

View Full Version : Looking for Brakes



blackfunk
01-28-2023, 06:49 AM
Hi guys and gals, looking to see where I can find the cheapest, literally the cheapest front rotors that I can buy. They can be used even and at the end of their life that would work as well.

Also looking for a shop on the east coast who's done an S4 to wagon swap - NYC Tri-state area. Looking into making the plunge.

jKar2013S4
01-28-2023, 06:53 AM
https://www.rockauto.com/en/catalog/audi,2013,s4,3.0l+v6+supercharged,1504515,brake+&+wheel+hub,rotor,1896

Check the economy section on this site, looks like 30-40 each


Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)

blackfunk
01-28-2023, 07:06 AM
Perfect. Thanks. Forgot about Rockauto.

Nillious
01-28-2023, 07:16 AM
Keep in mind rock auto charges shipping. also I speak from experience you almost always have a restock fee on returns.

sacandagaD
01-28-2023, 08:20 AM
Lots of cheap rotors out on Amazon and free shipping if you have Prime.

Nillious
01-28-2023, 08:33 AM
Being your in the northeast might be worth getting some coated rotors

blackfunk
01-28-2023, 04:00 PM
I just spent $1400 about 3 months ago on new rotors and pads so I'm looking for a cheap replacement.

Fresh.S4
01-28-2023, 07:32 PM
lets talk about how you spent 1400 and need something again?
generics from autozone or the likes?

blackfunk
01-29-2023, 03:54 AM
Its the AP Radical BBK formerly sold by Stillen who no longer support the platform so I need to have custom rotors made - that ran me just over $1000. I then needed to have the old rotors removed from the hat as they were to rusted and I could not get them removed as they were practically welded in place. Add in bolts and anti rattle clips were over $200 - I know I was being gouged on those but after searching for compatible part for the last 6months I didn't care that Brembo was charging all but my first born for replacements. Stillen was exactly 0% helpful in providing part numbers or dimensions etc.

Anti Rattle clips were $80 alone. I didn't even include the cost of pads.

You can read the saga here - https://www.audizine.com/forum/showthread.php/736139-DBFL-s-2016-S4-6MT-Build-Thread/page7

DBFL was beyond helpful in providing guidance etc