Sway Bar recommendations…

[jKar2013S4]

It looks like there’s two common sway bar setups as far as upgrades go.

1. The rear sway bar from 034
2. The front and rear sway bars from H&R

What did you guys do? Also I’ve heard some mention of removing the front sway bar entirely. Anyone hear about or do this?


Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)

[ccssid]

It looks like there’s two common sway bar setups as far as upgrades go.

1. The rear sway bar from 034
2. The front and rear sway bars from H&R

What did you guys do? Also I’ve heard some mention of removing the front sway bar entirely. Anyone hear about or do this?


Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)

https://www.ecodetuning.com/ec0202-0101r-eurocode-tuning-uss-adjustable-sway-bar-set-f-r-b8-b8-5.html?category_id=650

plus

https://www.ecodetuning.com/ec0202-0104-eurocode-uss-billet-aluminum-adjustable-front-end-links.html?category_id=650

[S4'ed]

Do both the front and rear bars, H&R or Eurocode tuning.

[B7TitaniumA4]

I did both eurocode, love them.


Sent from my iPhone using Tapatalk

[SpeedyG]

When I had my 2014 S4, I had front and rear H&R installed and they were great. I replaced all the bushings when I installed as I wanted a tight fit and no squeaks

[king_j]

Did front and rear with euro code and moog end links. Very solid, no noise.
I did notice that’s I don’t feel/notice the rear sport diff as much after the sways.
Maybe it’s just me, or rear diff was felt more when the car swayed.


Sent from my iPhone using Audizine Forum

[bakedziti]

I sat on a set of Eurocode sways for over a year before I sold them and went with H&R front and rear. I’ve seen a few issues with the Eurocode sways over on the C6 or maybe C7 platforms where they have failed and broken, but haven’t come across this on our platform. The H&R bars happened to be on sale when I bought them with one on limited quantity sale at ECS for ~$125 and the other from tire rack for ~$175, so I saved some considerable cash and went with a company I personally put more faith into.

[S4'ed]

I agree, the H&R bars are higher quality construction and paint finish than the Eurocode bar. The hollow Eurocode bars can fracture near the welded-on bushing retainer rings. The weld spots cause local material hardening and stress concentration points. The H&R bars are solid, and the retainer rings are not welded on, they have a retaining screw.