PDA

View Full Version : Reading sear part #s



JWebb_C7_Comp
09-24-2022, 07:55 AM
283127

Hey guys. This is from the under side of the black and red diamond stitch Valcona leather set in My 2018 a6.

The foam is oil slacked but leather good. My plan to get buy a donor seat and have a shop swap leather.

Does anyone really understand set part numbering. I have “ sport seats” but on don’t know if the back seat bottom is any different than non sport…




Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

widebodyfx
09-26-2022, 02:28 PM
The part seems to be the same between an A and an S (since you have the diamond stitch). When you select the part, you can see compatibility.

S
https://audi.7zap.com/en/usa/audi+a6+s6+quattro/a6q/2016-798/8/885-885020/

A
https://audi.7zap.com/en/usa/audi+a6+avant/a6/2016-798/8/885-885020/

JWebb_C7_Comp
09-26-2022, 05:49 PM
The part seems to be the same between an A and an S (since you have the diamond stitch). When you select the part, you can see compatibility.

S
https://audi.7zap.com/en/usa/audi+a6+s6+quattro/a6q/2016-798/8/885-885020/

A
https://audi.7zap.com/en/usa/audi+a6+avant/a6/2016-798/8/885-885020/

Thank you. That broadens potential donors!!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)