Log in

View Full Version : New ACC camera new problem/ ACC and Audi Braking Guard unavailable


Nemesis tl-s
08-09-2022, 05:06 PM
Today I got a used ACC camera from an 2015 A7, my car is a 2012 A6 and now I am getting a new code: C110A54 - Camera control module No basic setting. Is this because the hardware versions are different? My 2012 is Harvware version: H25 and this one is version H26. Or do I need to program this ACC camera some how?


85 On Board Camera

System description: DPC-SG
Software number: 4G0907217A
Software version: 0038
Hardware number: 4H0907217A
Hardware version: H26
Serial number: 26213002542100000000244307
ODX name: EV_OnBoardCamerDPC
ODX version: 001007
Long coding: 6A060000

Trouble codes:
C110A54 - Camera control module No basic setting
static
Date: 2022-08-09 13:35:04
Mileage: 228228 km
Priority: 3
Malfunction frequency counter: 1
Unlearning counter: 192
Control module temperature: 0.0 °C
Voltage terminal 15: 11.9 V
Outside air temperature: -32.0 °C
Audisthesia
08-10-2022, 09:47 AM
https://i.ibb.co/jVzSQWR/Screenshot-20220810-125037-Adobe-Acrobat.jpg (https://ibb.co/Jxq9GyQ)
Hurricane17
08-10-2022, 09:58 AM
https://i.ibb.co/jVzSQWR/Screenshot-20220810-125037-Adobe-Acrobat.jpg (https://ibb.co/Jxq9GyQ)

“If the rear axle toe setting has been changed”. Why would that make you have to recalibrate the camera? Lol


Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)
Nemesis tl-s
08-10-2022, 10:04 AM
How can I redo the basic settings?
Audisthesia
08-10-2022, 01:11 PM
How can I redo the basic settings?

The dealership.



“If the rear axle toe setting has been changed”. Why would that make you have to recalibrate the camera? Lol


Sent from my iPhone using Audizine Forum (http://r.tapatalk.com/byo?rid=87676)

Ask Audi, that's their manual, seems weird to me too
Alabama
08-10-2022, 04:16 PM
Ask Audi, that's their manual, seems weird to me too

In AZ thread "Alignment: Quoted $195 but charged $289 and told "That's cheap, I've billed $489"", post #18 from Sima-Koya states: "To be honest,it is recommended to do Windshield Multifunction camera calibration also when doing alignment of the car so don't be surprised. They were just following the service procedure. Car has to be mounted on ADAS calibration stand and then the MFC is calibrated after wheel alignment. "