Exstreve
08-08-2022, 09:34 AM
Hey All,
Curious if anyone would be interested in purchasing my 2016 Audi SQ5 Premium Plus in Ibis White as is or if I'm going to make it stock and part out. Car has nav, black optic pkg, 21" wheel package, B&O sound, heated seats. I am the second owner of the vehicle; I purchased CPO in 2018. The car has 89,300 miles and is good shape. However... I'm selling the car because the timing chain is starting to go. I can hear it rattle on start up and hard deceleration. The car was also hit while parked and was repaired. I can post pics if there is any interest. The car is APR Stage 2+ with a 57mm CTS SC pulley and 187 mm Fluidampr Crank Pulley. Mods below. I also have some other parts listed below that I will offer for sale regardless. I really don't know what to ask for the car, but I'm thinking about $36k. I expect I'll be stripping the car and selling it stock, please feel free to reach out or PM me if you're interested in any of the parts below.
I'm in Pittsburgh, PA. I am open to shipping the car and/or parts, but all shipping costs are the buyer's expense.
2016 Audi SQ5 Ibis White
89,300 Miles
Stock 21" Wheels with fresh 25540R21 Michelin Pilot Sport 4S SUV
APR Stage 2+
HP Tuners MPVI2 w/ BG (Berk Gerdes) ZF Tune
57mm CTS SC pulley - Staying on car
Fluidampr crank pulley w/ 187mm iABED ring- $500
APR CPS - $700
APR Ultracharger - $700
AutoTech HPFP Piston - $200
CWA-100 SC Pump - $200
Replaced factory cats with new OE cats @ 73,600 miles
Newer OEM (latest revision) SC intercooler bricks
Newer water pump, thermostat and PCV
034 XBrace - $350
Bilstein PSS10 coilovers - $1500
034 RSB & endlinks - $300
034 Adjustable front endlinks - $100
034 Motor Mounts - Staying on car
Brembo GT 380 MM BBK w/ ~2,000 miles - $3200
AWE Touring Exhaust w/ Diamond Black Tips - $1700
IE Non-res DPs - $400
Stealth hitch hidden hitch (have both receiver and ball, have electronics, but never wired up) - $500
Weathertech floor mats
P3 OBD2 Vent Gage - $200
Whispbar roof rails & OE roof rails - $350 for both (you're getting both if you buy 1 lol)
H&R Spacers 15mm front & 20 mm rear w/ corresponding length lugs - $200
New sunroof cassette, PA State Inspection and Emissions, and Oil Change (Liqui-Moly); just got the car back from the dealer for this service ~$2800.
Transmission was drained and filled w/ new filter @ ~75,000 miles
Extras for Sale
Full supercharger with throttle body and 57 mm pulley (not sure what brand the pulley is) - ready for porting
20" OEM Peelers from a Q7 powder coated graphite
Brembo GT 380x34MM BBK - Rotors have ~50k miles and new pads w/ approx. ~5k miles. Bought off another AZ user and never mounted. Nothing is wrong with the brakes, rotors could used turned, but pads, calipers, brackets, and SS lines all included.
Audi Cargo Box - 430L Black
BNIB 034 Motorsports Strut Tower Brace
VAGCOM - 3 VIN (1 VIN used)
034 Silicone Intake Tube
Here's the car, I apologize it's filthy just got back from a family road trip. Car will be detailed before final sale haha.
https://flic.kr/p/2nD7zYr
Curious if anyone would be interested in purchasing my 2016 Audi SQ5 Premium Plus in Ibis White as is or if I'm going to make it stock and part out. Car has nav, black optic pkg, 21" wheel package, B&O sound, heated seats. I am the second owner of the vehicle; I purchased CPO in 2018. The car has 89,300 miles and is good shape. However... I'm selling the car because the timing chain is starting to go. I can hear it rattle on start up and hard deceleration. The car was also hit while parked and was repaired. I can post pics if there is any interest. The car is APR Stage 2+ with a 57mm CTS SC pulley and 187 mm Fluidampr Crank Pulley. Mods below. I also have some other parts listed below that I will offer for sale regardless. I really don't know what to ask for the car, but I'm thinking about $36k. I expect I'll be stripping the car and selling it stock, please feel free to reach out or PM me if you're interested in any of the parts below.
I'm in Pittsburgh, PA. I am open to shipping the car and/or parts, but all shipping costs are the buyer's expense.
2016 Audi SQ5 Ibis White
89,300 Miles
Stock 21" Wheels with fresh 25540R21 Michelin Pilot Sport 4S SUV
APR Stage 2+
HP Tuners MPVI2 w/ BG (Berk Gerdes) ZF Tune
57mm CTS SC pulley - Staying on car
Fluidampr crank pulley w/ 187mm iABED ring- $500
APR CPS - $700
APR Ultracharger - $700
AutoTech HPFP Piston - $200
CWA-100 SC Pump - $200
Replaced factory cats with new OE cats @ 73,600 miles
Newer OEM (latest revision) SC intercooler bricks
Newer water pump, thermostat and PCV
034 XBrace - $350
Bilstein PSS10 coilovers - $1500
034 RSB & endlinks - $300
034 Adjustable front endlinks - $100
034 Motor Mounts - Staying on car
Brembo GT 380 MM BBK w/ ~2,000 miles - $3200
AWE Touring Exhaust w/ Diamond Black Tips - $1700
IE Non-res DPs - $400
Stealth hitch hidden hitch (have both receiver and ball, have electronics, but never wired up) - $500
Weathertech floor mats
P3 OBD2 Vent Gage - $200
Whispbar roof rails & OE roof rails - $350 for both (you're getting both if you buy 1 lol)
H&R Spacers 15mm front & 20 mm rear w/ corresponding length lugs - $200
New sunroof cassette, PA State Inspection and Emissions, and Oil Change (Liqui-Moly); just got the car back from the dealer for this service ~$2800.
Transmission was drained and filled w/ new filter @ ~75,000 miles
Extras for Sale
Full supercharger with throttle body and 57 mm pulley (not sure what brand the pulley is) - ready for porting
20" OEM Peelers from a Q7 powder coated graphite
Brembo GT 380x34MM BBK - Rotors have ~50k miles and new pads w/ approx. ~5k miles. Bought off another AZ user and never mounted. Nothing is wrong with the brakes, rotors could used turned, but pads, calipers, brackets, and SS lines all included.
Audi Cargo Box - 430L Black
BNIB 034 Motorsports Strut Tower Brace
VAGCOM - 3 VIN (1 VIN used)
034 Silicone Intake Tube
Here's the car, I apologize it's filthy just got back from a family road trip. Car will be detailed before final sale haha.
https://flic.kr/p/2nD7zYr