WTB 20x9.5+ light weight wheels

[Derpikarp]

Currently looking for a set of light weight 20x9.5 (et25-28), 20x10 (et30-33) to 20x10.5 (et33-35) wheels. Ideally would like to be as close to 20lb as possible. Open to forged, flow formed, etc. Please feel free to PM me with what you have!

Found a set of wheels, can a mod delete this?

[Gravy Train]

You'll have to go fully forged to get that weight target, and even then your estimate is too low. There's one manufacturer (not coming to me at the moment) who makes a high-dollar Magnesium wheel that checks in at 19.5lb for 20x9 fitment, but most forged aluminum 20x9.5 or 20x10 will weigh in at 21-24lbs.

Flow-formed wheels in the same fitment will range from 26-31lbs. I'm selling a set of Vorsteiner VFF-107s, in 20x9, that weigh around 27lbs, but have huge hoops to clear 420mm carbon ceramic brakes and calipers. I'm in DFW.

[Derpikarp]

You'll have to go fully forged to get that weight target, and even then your estimate is too low. There's one manufacturer (not coming to me at the moment) who makes a high-dollar Magnesium wheel that checks in at 19.5lb for 20x9 fitment, but most forged aluminum 20x9.5 or 20x10 will weigh in at 21-24lbs.

Flow-formed wheels in the same fitment will range from 26-31lbs. I'm selling a set of Vorsteiner VFF-107s, in 20x9, that weigh around 27lbs, but have huge hoops to clear 420mm carbon ceramic brakes and calipers. I'm in DFW.

I understand. There were a couple of different wheel options in the 20 inch sizing that are relatively low weight (Aodhan AFF7 @ 24lb for 20x10.5 (flow formed), neuspeed rse102 20x9.5 (forged) @ 23.5lb, some of the VS Forged series stuff that clocked in at around 20lb for a 20x10, etc). Trying to scope out of anyone's trying to sell a set of those (mostly the VS Forged or other forged options). I've gone ahead and revised the OP to specify a bit more.