Wastegate adjustment accessible with cat removed?

[AudiB720TS]

Can anybody tell me if the adjustment nuts for the wastegate preload are accessible with downpipe removed (with the turbo still installed).

[Jayz691]

You can adjust it without removing anything, on the stock k03.

Sent from my LM-G710VM using Audizine Forum mobile app (http://r.tapatalk.com/byo?rid=87676)

[EvolutionArmory]

Being able to adjust the wastegate without removing anything depends on what style rod it has. I was able to adjust my JHM K04R without removing anything. My CTS wasn’t able to be adjusted without removing things.

Since you have a Loba, I don’t know what style actuator rod they’re using. All you can do is stick a wrench in there and find out. 😉

[Jayz691]

Oh, I assumed he meant stock, since nothing was mentioned in the OP. My CTS I remove the TP, unbolt turbo from head, and pull it back. Takes me an hour to adjust my WG now. No need to remove any lines or hoses, besides pcv/n80 hoses. I don't have thr bracket installed though either..

Sent from my LM-G710VM using Audizine Forum mobile app (http://r.tapatalk.com/byo?rid=87676)

[AudiB720TS]

Thanks guys,