madlife
11-04-2021, 12:25 PM
I installed a Wakaa CarPlay/AA unit into my 2015 A8, and the result was zero display on my MMI screen (for any option of Media, Car, NAV, etc.) However on Media, my Bluetooth connected and songs played and I see the info on the cluster. Of course I have not been able to get hold of them Since Tuesday so I'm quite annoyed. First Audi so I could use a little knowledge.
is LVDS what sends the display from the Media player up to the screen? I have verified the harness is plugged in properly.
I hooked their ground onto one of the bolt holes for the glovebox which is on a metal bracket. Not sure what else to use as most is plastic. However when I push and hold "NAV" for 3s as directed, I hear a click from the Wakaa box.
Manual said to use Jumper 6 for my car. So I did. I also tried 6+7 per directions as I have radar and no change.
At the moment I unplugged the harness and put back to stock and everything works so I didn't bugger anything up.
Everything I can tell points at bad Wakaa unit or Wire harness but wanted to make sure. The lack of response from their support is killing me. When I reached out prior to ordering they got back to me within an hour.
is LVDS what sends the display from the Media player up to the screen? I have verified the harness is plugged in properly.
I hooked their ground onto one of the bolt holes for the glovebox which is on a metal bracket. Not sure what else to use as most is plastic. However when I push and hold "NAV" for 3s as directed, I hear a click from the Wakaa box.
Manual said to use Jumper 6 for my car. So I did. I also tried 6+7 per directions as I have radar and no change.
At the moment I unplugged the harness and put back to stock and everything works so I didn't bugger anything up.
Everything I can tell points at bad Wakaa unit or Wire harness but wanted to make sure. The lack of response from their support is killing me. When I reached out prior to ordering they got back to me within an hour.