20x9 et25 on the front? (265/35/20 tires)

[doublec4]

Looking to pick up a set of RS7 style replica wheels. They are 20x9 et25 all round. Just wondering if anyone has any rubbing on the front (or rear, but I think less likely) with et25? I'm on stock sline (sport?) suspension and will be running a 265/35/20 tire.

Thanks!

[p3u]

Need to know which car.

[doublec4]

2014 A7 Sline

[wangao0316]

You are fine with 20x9 et25 on A7. I have 20x9 et26 with 275/35/r20, lowered 15mm on S7, no rubbing at all.

[frozenguy]

I have 265/35/20 on all four on a 2017 A7 S line from factory

[Mine]

You are more than fine. I have 20x11 ET28, tire 285/30/R20. Yes, smaller tire but at factory height had zero rubbing. Even when I lower it when driving there's no rubbing.

[doublec4]

Might try and go to 275/35/20 to fill out the fender gap ever so slightly more since I have no plans on lowering. These came in today:

https://i.lensdump.com/i/0wpR9q.jpg

[Mine]

Its going to look great. When I went with the 285 Pilot Ports 4s, it has a small stretch and lower sidewall. It did rough up the ride quality some. However it work perfectly after I lowered it. Smart choice, just remember each tire company has different sidewall even in the same numbers. These forums helped me make my decision.

[scott99c2]

Its going to look great. When I went with the 285 Pilot Ports 4s, it has a small stretch and lower sidewall. It did rough up the ride quality some. However it work perfectly after I lowered it. Smart choice, just remember each tire company has different sidewall even in the same numbers. These forums helped me make my decision.

I run 295/30/20's on my S7 on 10.5" rims. No rubbing, all good.