Fuel injector seals

[Silentmdrummer]

Doing a carbon clean and I had an injector come out. May be a dumb question but what is the green ring for in the seal kit? I get the Teflon seal and o-ring but no clue on the green ring. 213991


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[shortyolsen2017]

You can normally get away with reusing them if one or 2 pop out, no rebuild necessary.

Sent from my SM-N960U1 using Tapatalk

[Silentmdrummer]

You can normally get away with reusing them if one or 2 pop out, no rebuild necessary.

Sent from my SM-N960U1 using Tapatalk

Yeah I thought about it but I have the tool to do the Teflon seal and I already had the seals. Just can’t figure out what the green thing is


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[6SpeedS4]

Yeah I thought about it but I have the tool to do the Teflon seal and I already had the seals. Just can’t figure out what the green thing is


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)It goes under the black o ring. Your old one looks brown though.

I just did this and only replaced the top o ring. No issues. I recommend super lube to lubricate upon installation.

Sent from my SM-N975U using Tapatalk

[Allan691]

It is a spacer... See photo.
214006

[Silentmdrummer]

It is a spacer... See photo.
214006

That definitely answers my question. Thanks for the help


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Allan691]

That definitely answers my question. Thanks for the help

You are welcome. Make sure you remove the old one (brown as pointed out by the previous poster).