hockeyman474
02-14-2020, 07:37 AM
Considering putting up my 2003 S6 for sale. According to Audi of America, there are only 26 painted in Goodwood Green in the US and only 2 of them with alcantara interior. This car has just under 160k miles. Timing belt was done at 105k. I have all service records back to 70k. The only mods are RS6 SE exhaust with 4" magnaflow tips, 20% tint on everything except the windshield and the S5 peelers with Michelin A/S3+ tires with tons of tread left.
I will be getting the car detailed inside and out prior to sale. Oil change wit Liqui Moly was just performed 1200 miles ago. December of 2018 I replaced both HID bulbs with Morimoto 4500k bulbs. The car has normal wear and tear from 160k miles and 17 years of use. No tears in the seats or headliner. The front drivers side was scraped by a driver in a parking lot and they left the scene. I used an insurance claim on that and used the money to buy another C5 S6 bumper without front plate mounting holes so that will be included in the sale.
Right now this is just a feeler so I am sure I am leaving some stuff out but lmk if you have questions.
https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-0/p640x640/84270823_10163385781035422_8900819550543544320_o.j pg?_nc_cat=106&_nc_ohc=XewzO_KbwN4AX_tXe-T&_nc_ht=scontent-ort2-1.xx&_nc_tp=6&oh=94dc96f4df91f929e6382efdea72950f&oe=5EBA95D3
https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/84282893_10163385781020422_4174172977182539776_o.j pg?_nc_cat=111&_nc_ohc=VRdKEUbYYlMAX9dIUzD&_nc_ht=scontent-ort2-1.xx&oh=fd08d6fefb33a93d6c9f25e249cce823&oe=5EC81E8D
I will be getting the car detailed inside and out prior to sale. Oil change wit Liqui Moly was just performed 1200 miles ago. December of 2018 I replaced both HID bulbs with Morimoto 4500k bulbs. The car has normal wear and tear from 160k miles and 17 years of use. No tears in the seats or headliner. The front drivers side was scraped by a driver in a parking lot and they left the scene. I used an insurance claim on that and used the money to buy another C5 S6 bumper without front plate mounting holes so that will be included in the sale.
Right now this is just a feeler so I am sure I am leaving some stuff out but lmk if you have questions.
https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-0/p640x640/84270823_10163385781035422_8900819550543544320_o.j pg?_nc_cat=106&_nc_ohc=XewzO_KbwN4AX_tXe-T&_nc_ht=scontent-ort2-1.xx&_nc_tp=6&oh=94dc96f4df91f929e6382efdea72950f&oe=5EBA95D3
https://scontent-ort2-1.xx.fbcdn.net/v/t1.0-9/84282893_10163385781020422_4174172977182539776_o.j pg?_nc_cat=111&_nc_ohc=VRdKEUbYYlMAX9dIUzD&_nc_ht=scontent-ort2-1.xx&oh=fd08d6fefb33a93d6c9f25e249cce823&oe=5EC81E8D