VipinLJ
02-03-2020, 10:46 AM
I have 2 pairs (4 spacers in all) of H&R DR series wheel spacers (5mm) along with 20 (5 per wheel) long bolts (Ball seat wheel bolts - 14x1.5x32mm) to replace the stock ones that came with the car. I used it in a 2017 Audi A4 B9 (with stock 18” rims) for less than 500 miles (reason for low mileage given below - removed it before I returned my car).
I bought and installed it when I lowered my car on 034 springs. Initial install caused vibrations at speeds above 60mph and I couldn’t find anyone to help me redo it. I removed it back then after around 25 miles and didn’t reinstall it. A while later, my car had two flat tyres and it needed new ones. Took it to a discount tire nearby and met a nice guy there who liked how my car looked and said I should get spacers and 5mm spacers would do. I told him my story and he asked me to bring it, since he was a car guy too and knew how to install it perfectly. Brought it to him again and he managed to install it perfectly. Car had zero vibrations even at very high speeds :D But then, it was time to return my car and in less than 500 miles, the car went back to Audi. But not before I removed these back in November 2019. Recently cleaned up my garage and saw them lying around. Which is why it’s up for sale.
Perfect installation is up to the buyer. I will not be held responsible.
Links for the exact spacers I have:
1. https://www.ecstuning.com/b-h-and-r-parts/dr-series-wheel-spacers-5mm-1-pair/1055665/
2. https://www.ecstuning.com/b-ecs-parts/ball-seat-wheel-bolt-14x15x32mm-priced-each/s17d32r13znni/
I’m willing to let the entire set (4 spacers and 20 wheels nuts) go for $75 excluding shipping. Item is located at 60914 (Bourbonnais, IL) in case you want to check online for shipping costs. I’m also open to offers.
I’ll post actual photos when I get home in a few.
I bought and installed it when I lowered my car on 034 springs. Initial install caused vibrations at speeds above 60mph and I couldn’t find anyone to help me redo it. I removed it back then after around 25 miles and didn’t reinstall it. A while later, my car had two flat tyres and it needed new ones. Took it to a discount tire nearby and met a nice guy there who liked how my car looked and said I should get spacers and 5mm spacers would do. I told him my story and he asked me to bring it, since he was a car guy too and knew how to install it perfectly. Brought it to him again and he managed to install it perfectly. Car had zero vibrations even at very high speeds :D But then, it was time to return my car and in less than 500 miles, the car went back to Audi. But not before I removed these back in November 2019. Recently cleaned up my garage and saw them lying around. Which is why it’s up for sale.
Perfect installation is up to the buyer. I will not be held responsible.
Links for the exact spacers I have:
1. https://www.ecstuning.com/b-h-and-r-parts/dr-series-wheel-spacers-5mm-1-pair/1055665/
2. https://www.ecstuning.com/b-ecs-parts/ball-seat-wheel-bolt-14x15x32mm-priced-each/s17d32r13znni/
I’m willing to let the entire set (4 spacers and 20 wheels nuts) go for $75 excluding shipping. Item is located at 60914 (Bourbonnais, IL) in case you want to check online for shipping costs. I’m also open to offers.
I’ll post actual photos when I get home in a few.