Flower Petal Wheel Offset

[SD2015S4]

Does anyone know the offset for the "Flower Petal" wheels that come on the 2015 Black Ops (US). Picture below. Also wondering if anyone has determined the appropriate spacer size for a flush wheel fitment for these wheels. I know this is probably somewhere on AZ but have looked through the wheel fitment discussions and can't find it.

Thanks!

[bakedziti]

Does anyone know the offset for the "Flower Petal" wheels that come on the 2015 Black Ops (US). Picture below. Also wondering if anyone has determined the appropriate spacer size for a flush wheel fitment for these wheels. I know this is probably somewhere on AZ but have looked through the wheel fitment discussions and can't find it.

Thanks!

ET43.

https://www.audizine.com/forum/showthread.php/867493-OEM-2016-S4-Black-Optic-Titanium-V-Spoke-(Flower)-Wheels-with-Continental-tires?highlight=Flower

[XxSullyxX123]

Same fitment as the Peelers and the Rotors off of the S4. 19x8.5 ET43. It says in in the inside of the spokes too. I've personally had all 3 19" wheel options on my 2 S4's.

I currently run the ECS "Aggressive Flush" Kit with my Rotors which is 10mm front 12.5mm spacers in the rear. it's still not perfect. maybe 10/15 or 12.5/15 is better, especially if you are lowered at all. I never tried it with my flowers, as I got the spacers after the rotors.

[SD2015S4]

Same fitment as the Peelers and the Rotors off of the S4. 19x8.5 ET43. It says in in the inside of the spokes too. I've personally had all 3 19" wheel options on my 2 S4's.

I currently run the ECS "Aggressive Flush" Kit with my Rotors which is 10mm front 12.5mm spacers in the rear. it's still not perfect. maybe 10/15 or 12.5/15 is better, especially if you are lowered at all. I never tried it with my flowers, as I got the spacers after the rotors.

Thanks. This is super helpful. Full disclosure - I have no experience with wheel fitment. Is there a chance the petals could protrude (or appear to) further from the hub with same width and offset due to the design differences? Your note above suggests this shouldn't be an issue as the aggressive kit still isn't quite fully flush, but looking for opinions.

[XxSullyxX123]

Thanks. This is super helpful. Full disclosure - I have no experience with wheel fitment. Is there a chance the petals could protrude (or appear to) further from the hub with same width and offset due to the design differences? Your note above suggests this shouldn't be an issue as the aggressive kit still isn't quite fully flush, but looking for opinions.

It shouldn't. Sure it'll look a little different given it's a different style, but the width of the wheels are the same and the offset is the same, and the tires are the same. so it should sit exactly the same, given the relationship between wheel width and what the definition of offset is.

[stereojorge]

Same fitment as the Peelers and the Rotors off of the S4. 19x8.5 ET43. It says in in the inside of the spokes too. I've personally had all 3 19" wheel options on my 2 S4's.

I currently run the ECS "Aggressive Flush" Kit with my Rotors which is 10mm front 12.5mm spacers in the rear. it's still not perfect. maybe 10/15 or 12.5/15 is better, especially if you are lowered at all. I never tried it with my flowers, as I got the spacers after the rotors.

Hit it on the head, 12.5mm/15mm especially if you’re lowered is just right! My previous S4:

https://uploads.tapatalk-cdn.com/20191115/776b27c65f6c51d986ed28da71cc4d84.jpg


Sent from my iPhone using Tapatalk