pachilla
11-11-2019, 07:32 PM
I have a EDM 2015 A4 B8.5 2.0T EA888 GEN III Quattro DL501 0B5 Tranny,
MTM Stage 1 Tune, ECS FMIC, APR Intake, Super Sprint Axle-Back Exhaust, HJS Euro VI 200 Cell Hi-Flow CAT.
I jumped to ~50% throttle while rolling slowly from 30km/h in 2nd or 3rd gear (I can't remember) in Auto Mode and after a strong 1-second-ish full-boost engine pull, the warning lights came on (Transmission Malfunction, Reverse Gear Malfunction, Tire Pressure etc.)
I continue to drive slowly for 10 min until reach home and the vehicle obviously had lost 2nd gear, I was limping home in 1st and 3rd, I am not sure about 4th or higher because I was going slowly and the transmission didn't try to shift any higher.
Anyway, I went home, parked with the Reverse still worked even the dashboard says Reverse was unavailable, shut the engine and restart the engine, then all became fine.
I scanned for codes and it was
18056-Shift Fork 4 Position Sensor
P2848 00 [101] - Incorrect Neutral Position.
https://scontent.ftpe12-2.fna.fbcdn.net/v/t1.0-9/p720x720/76651731_10159124769981038_4466579096633081856_o.j pg?_nc_cat=109&_nc_eui2=AeFQmRjVKUIzcQbq_iVMMVEozg59WR2u6gUOilBH5 yE8r-CUO1jigET8JjPbffktwAT4jZsxJTH4PCmN4ZOKsZhokxz6cn2i RHGVUpkWETz01g&_nc_oc=AQlGe_EtvuVFNOvWjGXg_0pkM1zL_qpOcmRPLfZssQ5 8es3bPCNldB_YsGlKkUGczD4MnBuzelSWlwex_So7xcPg&_nc_ht=scontent.ftpe12-2.fna&oh=59cc9b17e44d7f92367639170a01756e&oe=5E4AF0F7
Anyone has any idea why this has happened? I searched around and it seems that P2848 is not a common fault code for DL501 0B5, so I would like to know if anyone can help me on this.
Thanks
MTM Stage 1 Tune, ECS FMIC, APR Intake, Super Sprint Axle-Back Exhaust, HJS Euro VI 200 Cell Hi-Flow CAT.
I jumped to ~50% throttle while rolling slowly from 30km/h in 2nd or 3rd gear (I can't remember) in Auto Mode and after a strong 1-second-ish full-boost engine pull, the warning lights came on (Transmission Malfunction, Reverse Gear Malfunction, Tire Pressure etc.)
I continue to drive slowly for 10 min until reach home and the vehicle obviously had lost 2nd gear, I was limping home in 1st and 3rd, I am not sure about 4th or higher because I was going slowly and the transmission didn't try to shift any higher.
Anyway, I went home, parked with the Reverse still worked even the dashboard says Reverse was unavailable, shut the engine and restart the engine, then all became fine.
I scanned for codes and it was
18056-Shift Fork 4 Position Sensor
P2848 00 [101] - Incorrect Neutral Position.
https://scontent.ftpe12-2.fna.fbcdn.net/v/t1.0-9/p720x720/76651731_10159124769981038_4466579096633081856_o.j pg?_nc_cat=109&_nc_eui2=AeFQmRjVKUIzcQbq_iVMMVEozg59WR2u6gUOilBH5 yE8r-CUO1jigET8JjPbffktwAT4jZsxJTH4PCmN4ZOKsZhokxz6cn2i RHGVUpkWETz01g&_nc_oc=AQlGe_EtvuVFNOvWjGXg_0pkM1zL_qpOcmRPLfZssQ5 8es3bPCNldB_YsGlKkUGczD4MnBuzelSWlwex_So7xcPg&_nc_ht=scontent.ftpe12-2.fna&oh=59cc9b17e44d7f92367639170a01756e&oe=5E4AF0F7
Anyone has any idea why this has happened? I searched around and it seems that P2848 is not a common fault code for DL501 0B5, so I would like to know if anyone can help me on this.
Thanks