Front brake caliper pin part number???

[Zeab]

Replaced the brakes on my 2017 S6 with the Brembo's but screwed up a couple of screws and can't find replacements. These are about 1 1/2 inches in length with half of it with threads near the head and smooth pin like on the other end. There are two screw/pins on either side of the caliper that go in through the side with pins that stick into the caliper to help align the pads. They are torx head and colored black.

I can't seem to find anything even similar to these on the net and would really like to get them replaced. Any ideas on part number?

[bpd]

I think what you are looking for is here under Disc brake hardware kit. If you are in a hurry, Im sure local parts store may have it.

https://www.rockauto.com/en/catalog/audi,2017,s6,4.0l+v8+turbocharged,3434195,brake+&+wheel+hub,disc+brake+hardware+kit,1736

[Zeab]

You are a life saver as that is exactly what I was looking for. Thank you very much

[bpd]

Can you say what happened to your pins? Were you able to remove them? The service manual says NOT to remove. I tried to do it anyway, but they were in there tight, so I gave up. Felt like I would strip the head. Taking them out would make installing pads so much easier. So I left them.