Identify S7 park sensor part

[Andreasmkr]

Does anyone have the part numbers for the brackets on the a/s/rs 7 side parking assist?

https://i.ibb.co/PQHNdN3/428-34677333.jpg (https://ibb.co/PQHNdN3)

My RS7 front bumper came without

[RAF_S7]

This sensor is part of the Parking Advanced option pack, which provides semi-autonomous parking assistance.

It’s not a standard sensor for parking assist, and unless you are going to retro fit the Parking Advanced package ($$$$) you cannot connect it up to the normal parking sensors.

It’s Part# 13 & 14 here (https://audi.7zap.com/en/rdw/audi+a7+sportback/a7/2016-788/8/807-807010/) (Excluding the actual sensor itself)

[Andreasmkr]

This sensor is part of the Parking Advanced option pack, which provides semi-autonomous parking assistance.

It’s not a standard sensor for parking assist, and unless you are going to retro fit the Parking Advanced package ($$$$) you cannot connect it up to the normal parking sensors.

It’s Part# 13 & 14 here (https://audi.7zap.com/en/rdw/audi+a7+sportback/a7/2016-788/8/807-807010/) (Excluding the actual sensor itself)

I`m converting my S7 front bumper to a RS7 front. My s7 already have the Parking Advance package so I would like to get it adapted onto the RS7 front.

As per the parts diagram they are not exchangeable :(
Any idea if they can be mounted flush to the bumper ?

[Andreasmkr]

Wondering if these would be the same?

https://www.carsystems.eu/vw-park-assist-pla-holder-set,id3275.html

[RAF_S7]

Those parts are the wrong shape for the bumper.
Are you 100% certain you can't transfer S7 to RS7? When I did the RS7 grill install onto my S7, a lot of the parts transferred over.

I have a feeling the bumper comes primed, and you have to drill to fit any additional fittings (I think you can order it with the regular park assist cutouts, but not 100%

Are you going OEM conversion, or aftermarket?

[Andreasmkr]

Those parts are the wrong shape for the bumper.
Are you 100% certain you can't transfer S7 to RS7? When I did the RS7 grill install onto my S7, a lot of the parts transferred over.

I have a feeling the bumper comes primed, and you have to drill to fit any additional fittings (I think you can order it with the regular park assist cutouts, but not 100%

Are you going OEM conversion, or aftermarket?

I am going to transfer all the parts from the S7 front bumper indeed, but the RS7 aftermarket front does not have the side park assist sensors holes. I have no idea if the brackets can be transferred from the S7 bumper to the aftermarket one?

I know I have to drill the holes for it.

[Andreasmkr]

Does anyone have the correct hole placement for the side parking assist sensor? Or are able to take some measurements of one?

Need hole diamenter and correct placement on the front bumper taken from a few reference points on the front.[confused][wrench]

My S7 is getting it`s engine replaced so wont have it back for another week or so. [headbang]