View Full Version : APR Stage 2 Dyno test
MolonLabe300
04-20-2019, 02:40 PM
I had the day off yesterday so I scheduled some time with Solo Motorsports (mustang Dyno) in Atlanta. Here's the results of my APR S2 with Milltek non res, turbo back exhaust. I do not have the APR TCU tune, yet...
Run 1
HP 466
TQ 616
Run 2
HP 464
TQ 607
Run 3
HP 463
TQ 573
117169117170
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
scott99c2
04-20-2019, 02:52 PM
What DP’s you using? Looks good!
MolonLabe300
04-20-2019, 03:43 PM
What DP’s you using? Looks good!Milltek. They are similar to APR (cats in same location).
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
Joe'sS6
04-20-2019, 05:29 PM
That is a strong run.
What Octane file are you using?
And what fuel?
Sent from my SM-G950F using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
MolonLabe300
04-20-2019, 05:46 PM
That was on 93 IIRC it was VP Racing.
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
Barritia
04-20-2019, 06:03 PM
I thought APR say stage 2 is about 600hp/700ftlb’s?
MolonLabe300
04-20-2019, 06:06 PM
I thought APR say stage 2 is about 600hp/700ftlb’s?Those look like at the crank numbers.
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
Nick Fury
04-20-2019, 09:02 PM
I thought APR say stage 2 is about 600hp/700ftlb’s?If there's a 22% loss to the wheels, it's about 600hp.
Sent from my BBB100-1 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
bobby1216
04-21-2019, 01:54 AM
check their website. torque looks good, HP seems low?
Four rings fan
04-21-2019, 02:45 AM
When i first saw this thread last night i was thinking like others that these stage2 dyno number look low. I get that this is a Mustang dyno but I'd expect close to 500 wheel hp out of a stage2 tune on 93 octane. Going by what APR advertises.
Torque seems to be in line with APR estimates, but HP seems low.
EDIT: Just realized this is a C7 not a C7.5. That would explain lower numbers.
Valpo A7
04-21-2019, 04:39 AM
No 2 cars will have the same HP drivetrain loss. 17-25% loss seems to be the range for an AWD car. The perceived power loss could even be a discrepancy in the dyno calibration. Without pulling the motor and testing power at the flywheel it’s all just an educated and calculated guess.
Barritia
04-21-2019, 05:01 AM
That would mean his TQ would be under 500ft lb if you took 20% off or about 750 if you add 20%. So either way you look at it these numbers seem off. Like you say though if everyone is using different calculations that could be where the difference is.
Mavfan1
04-21-2019, 05:31 AM
I think it’s funny that he blurs out his plate but leaves his personal info on the dyno sheet.
Sent from my iPhone using Tapatalk
I've always thought straight dyno numbers are not real useful. You need a stock baseline run first in order to see what the gains are on that particular dyno on that particular day with that particular car.
MolonLabe300
04-21-2019, 08:26 AM
I've always thought straight dyno numbers are not real useful. You need a stock baseline run first in order to see what the gains are on that particular dyno on that particular day with that particular car.True, I really wanted to set a Delta but with my schedule I couldn't make it happen
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
MolonLabe300
04-21-2019, 08:35 AM
Looking back I would have given the car a couple hours to cool down after the almost 2 hour drive. I also didn't calculate the DA like I should have.
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
Chiromikey
04-21-2019, 09:17 AM
Dyno numbers mean nothing, especially without any sort of baseline for comparison! Real world acceleration performance tells the story. I love watching guys with their big dyno graphs get trounced at the track. Save those “low reading” graphs and go make some money at the track!
sickmade0331
04-22-2019, 04:53 AM
My stage 2 made 540 on 93 and 700tq
Sent from my SM-G975U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
i8snitches
04-22-2019, 08:28 AM
A friend with APR Stage 2+ on 100 file with A6 (C7) made 491hp and 445tq on Mustang Dyno over the weekend... expected more but seems to be in-line with real world dyno...
OlyS6
04-22-2019, 09:14 AM
My stage 2 made 540 on 93 and 700tq
Sent from my SM-G975U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
Where did you get yours dyno'd? Carbconn?
MolonLabe300
04-22-2019, 09:28 AM
My stage 2 made 540 on 93 and 700tq
Sent from my SM-G975U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)What Dyno was used, Mustang or dynojet?
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
sickmade0331
04-22-2019, 12:31 PM
What Dyno was used, Mustang or dynojet?
Sent from my Pixel 2 XL using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Mustang dyno by AMD in Woodinville wa.
Sent from my SM-G975U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
ichi d
04-22-2019, 05:12 PM
I love how no one is bashing Apr but if this was epl people would be going to town on them. 😂
DGVR6
04-24-2019, 10:55 AM
What is there to bash though?
I dyno a little lower than that on 100.. dynos don’t tell the whole truth.
But I did a 93 then 100 file switch to see how much gain there was on the 100map, not for a HP dick swinging contest.
APR is pretty accurate about their gains. You’ll need a baseline though.