View Full Version : Shark fin antenna removal
Jlai14
03-16-2019, 12:44 AM
Would I have to remove the whole head liner to be able to disconnect the shark fin antenna? I want to wrap my roof and want to make it as painless as possbile.
fstr n u
03-16-2019, 05:50 AM
I was wondering the same thing....
endy1
03-16-2019, 06:10 AM
No need to remove thw whole thing, "Just" in the back. Sits with typical clips that sometimes needs alot of force so its abit scary when you pull down. Can be a good idea to remove the covers on the c-pillars, on the passenger its needed since the cables from the antenna connects there.
Joker S4
03-16-2019, 07:49 AM
No need to remove thw whole thing, "Just" in the back. Sits with typical clips that sometimes needs alot of force so its abit scary when you pull down. Can be a good idea to remove the covers on the c-pillars, on the passenger its needed since the cables from the antenna connects there.
x2. It's a little stressful with the amount of force that needed, but necessary.
bakedziti
03-22-2019, 08:59 AM
https://www.audizine.com/forum/showthread.php/701896-B8-A4-DIY-Headliner-Removal
wish i could get this moved to the right section.
mys4.org
03-22-2019, 01:27 PM
I got a easier solution... I say wrap over the shark fin, cut a little hole so as not to stretch the wrap too much. Then use this to cover it:
https://www.ecstuning.com/b-ecs-parts/b8-facelift-carbon-fiber-antenna-cover/022697ecs01~a/
https://www.ecstuning.com/b-ecs-parts/b8-pre-facelift-carbon-fiber-antenna-cover/022696ecs01~a/
You could wrap the cf shark fin cover if you want to keep in the same color.