PDA

View Full Version : Coolant Fan Switch ATW vs AWM



dalazybastard
10-23-2018, 06:18 PM
In a pinch and want to make sure Iím doing the right thing.

ATW

The fan switch coolant sensor on a ATW car goes into the back of the radiator and has three prongs.

Brown: Ground
Brown (black tracer): Low speed?
Red (green tracer): High Speed?

https://uploads.tapatalk-cdn.com/20181024/0871908a35aa0d740a82d517221c6452.jpg

AWM

The fan switch coolant sensor on a AWM car goes into the the lower radiator hose with the blue sensor with FOUR wires.

Brown:
Brown:
Brown (black tracer):
Red (green tracer):

https://uploads.tapatalk-cdn.com/20181024/80e7a7d1b6bbb47c7c371c1c7f7cdcf1.jpg

Iím gonna assume that the two browns are grounds and the brown/black and red/green are speeds similar to the ATW car.

If someone could confirm this before I start cutting/splicing or provide diagrams to confirm this I would be very grateful.

Pics for clicks
(Build thread on Red car to come soon)

https://uploads.tapatalk-cdn.com/20181024/2cb0fb32f05d8f8b64d5bd5616c413d0.jpg



Sent from my iPhone using Tapatalk