Log in

View Full Version : Need help... Street Shield Install



Sick S4
10-13-2018, 06:54 PM
Hey Guys
Plan was to change oil and install street sheild. Oil went well as usual but can not install street shield because my M10 Triple square bolts holding the power steering shield are completely shaved... guess the consequences of being low. Anyhow any suggestion on how the hell to get these out? Note: I tried easy out and no way that is going to work.

All suggestions or crazy ideas are welcome.

- Brian


Sent from my iPhone using Tapatalk

Sick S4
10-13-2018, 06:56 PM
Btw here are the pics of the heads of the bolts... https://uploads.tapatalk-cdn.com/20181014/479d04714b69f62f05f0536e93316593.jpghttps://uploads.tapatalk-cdn.com/20181014/8c9f01fd9265ccf42d5d46462a56f17b.jpg


Sent from my iPhone using Tapatalk

Mac's
10-13-2018, 07:32 PM
Did you try easy out in a screw not pictured here? Because the screw head would have to be perfectly cleaned out and the proper size hole drilled into it so you can use your extractor.

Sick S4
10-13-2018, 08:06 PM
Did you try easy out in a screw not pictured here? Because the screw head would have to be perfectly cleaned out and the proper size hole drilled into it so you can use your extractor.

Mac, it’s not that easy out wouldn’t have worked. The problem is I can’t get the car high enough off the ground to get drill and bit to fit under the car to drive it straight in. I should have been more specific.


Sent from my iPhone using Tapatalk

RCKLS
10-13-2018, 09:57 PM
Hey sick s4 I was in similar situations before, I installed ecs street shields for pan and tran....

Try to break the tension of that bolt with a needle nose or locking pliers they work best
or
Use a small screw driver with the extractor bit on the end, if you're really desperate

just brainstorming...

audi_403
10-14-2018, 08:05 AM
Keep it simple, use a chisel and a hammer.
If you don’t know what that means see the link at about the 4:49 mark
https://youtu.be/WDOWPekMX44


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Sick S4
10-14-2018, 08:13 AM
Thanks guys. I will try these out and let you know how it goes.


Sent from my iPhone using Tapatalk

rand0mher0
10-14-2018, 09:44 AM
It looks like theres just a bunch of shit built up in the head, i bet you can get a pick and pick some of it out and be able to get the triple square bit in there