king_j
09-27-2018, 12:30 PM
Hello all. Need to see what the measurement is from the center of the wheel to the middle of the fender at the bottom of the arch.
Per eibach, the springs I have (pro kit) are 1/4” lower than what they should be at.
This would be the reason I’m rubbing in front.
Just want to compare to what other members have.
I’m not sure if I should order the pro kit again and just use new front springs, or get new springs/C0 altogether.
My front measure 13” from the wheel center to the fender.
Per Eibach, they don’t use FTG measurements.
Sent from my iPhone using Tapatalk
Per eibach, the springs I have (pro kit) are 1/4” lower than what they should be at.
This would be the reason I’m rubbing in front.
Just want to compare to what other members have.
I’m not sure if I should order the pro kit again and just use new front springs, or get new springs/C0 altogether.
My front measure 13” from the wheel center to the fender.
Per Eibach, they don’t use FTG measurements.
Sent from my iPhone using Tapatalk