PDA

View Full Version : Change rear brakediscs with bearings to discs without



scaro
09-08-2018, 11:57 AM
Hi

I want to upgrade my rear brakes on my old Audi A4 B5 2wd. Trouble is that i have wheelbearings in brakediscs.
There is alot more discs to choose from if i have hubs instead.
Maybee there is someone else that have done this but havnt found any thread.

Question is, will wheelhubs with bearings inside fit pnp or do i have to change rearaxle?

Mattr567
09-08-2018, 01:25 PM
Hi

I want to upgrade my rear brakes on my old Audi A4 B5 2wd. Trouble is that i have wheelbearings in brakediscs.
There is alot more discs to choose from if i have hubs instead.
Maybee there is someone else that have done this but havnt found any thread.

Question is, will wheelhubs with bearings inside fit pnp or do i have to change rearaxle?

I have dabbled with this, info: https://www.audizine.com/forum/showthread.php/798028-Matt-s-Fwd-Build-Thread?p=13186843&viewfull=1#post13186843

C4 100 fwd rear hubs will bolt up, will need some type of rotor spacer if not using the C4 rotors which are the same size as stock fwd B5.

scaro
09-08-2018, 01:28 PM
Thanks will read thru that :)