Lowering S7/6

[Cam.CL.S7]

For those of you who are lowered via VCDS or Links, how much negative camber do you all have? It would depend on how low you go but those of you lowered an inch or less are you burning through tires? Or were you able to align the car back to 0?

[blinx9900]

For those of you who are lowered via VCDS or Links, how much negative camber do you all have? It would depend on how low you go but those of you lowered an inch or less are you burning through tires? Or were you able to align the car back to 0?

I’ve done it on my S7, did alignment at the same time. Shop said it aligned just fine.


Sent from my iPhone using Tapatalk

[Cam.CL.S7]

I’ve done it on my S7, did alignment at the same time. Shop said it aligned just fine.


Sent from my iPhone using Tapatalk

Did you see the print out after? Also how low did you go?


Sent from my iPhone using Tapatalk

[blinx9900]

No i didn’t see the print out, u told them go as low as possible, they said they got 20mm. Comfort is like dynamic now and dynamic is even lower. Honestly camber is not a concern. Toe is what eats up tires.

[Cam.CL.S7]

No i didn’t see the print out, u told them go as low as possible, they said they got 20mm. Comfort is like dynamic now and dynamic is even lower. Honestly camber is not a concern. Toe is what eats up tires.

Did you go links or computer lowering?? I’m thinking I’m going to have mine lowered using the VDCS


Sent from my iPhone using Tapatalk

[blinx9900]

Did you go links or computer lowering?? I’m thinking I’m going to have mine lowered using the VDCS


Sent from my iPhone using Tapatalk

Computer lowering :)

[Barritia]

You can’t adjust camber on the front without the adjustable control arms. The rear as a small amount of adjustment that should be fine with software lowering. So beware of shops who say they adjusted fronts and don’t give you the print out. Mine lowered 17mm had the camber way out. Enough so the inside edges were wearing down quicker than the outsides. Car feels like it grips better in corners to after adjustment. Plus the biggest thing is the front and back wheels look the same angle now instead of jacked up camber settings. Beware though that it will affect your offset clearances if you run spacers. I had to drop 7.5mm on front spacers after adjustment.

[martinitime]

Did you go links or computer lowering?? I’m thinking I’m going to have mine lowered using the VDCS


Sent from my iPhone using Tapatalk

How does it ride now in both modes?

[blinx9900]

How does it ride now in both modes?

Both modes ride like they did before but with less body roll. Somehow it makes comfort feel more comfortable for me but that could be in my head.