PDA

View Full Version : Additional BBK pics



chadwix00
01-21-2006, 01:36 PM
A few people asked about my custom BBK so here are some more pics. 19x8.5 M-Classics et35 with 5mm spacers. As you can see, I have plenty of clearance. [;)] I think eventually I'll go back and respray to get a shinnier finish -- didn't wet sand it enough I guess.

http://i2.photobucket.com/albums/y13/cybrchaddy/IMGP0140.jpg

http://i2.photobucket.com/albums/y13/cybrchaddy/Picture059.jpg

http://i2.photobucket.com/albums/y13/cybrchaddy/Picture061.jpg

http://i2.photobucket.com/albums/y13/cybrchaddy/Picture062.jpg

Monchichi8
01-21-2006, 01:37 PM
sick

blacka41point8t
01-21-2006, 02:52 PM
pure sex.

Rosati
01-21-2006, 05:54 PM
my comment is not needed.

Beautiful rims , car , and setup

scooter44
01-21-2006, 06:33 PM
nice.

SoleMate
01-21-2006, 08:59 PM
amazing the sickest b5 on here is rocking ADRs. what size are those rotors btw?

WhippeD
01-21-2006, 09:31 PM
i'm gonna jack your car up, steal your brakes, and leave your car on jackstands...hahaha

diegomatrix
01-21-2006, 09:46 PM
Originally posted by WhippeD
i'm gonna jack your car up, steal your brakes, and leave your car on jackstands...hahaha

... you mean 'bricks', not jackstands... lol....

i'll help ^^

werksmini
01-21-2006, 09:51 PM
Sweet, how big are those? What set up are those? Any plans for the rears?

chadwix00
01-22-2006, 03:34 AM
The brakes were pieced together. The rotors are 321mm x 30mm zimmerman cross drilled. The calipers are Porsche Boxster S which were sanded and repainted black with brembo decals to replace the porsche decals (made by brembo anyways). The brackets, hardware, and SS lines were picked up at EVOMS. I have cross drilled rotors for the rear but will not do anything else. Thanks!

nmb
01-22-2006, 04:41 AM
Originally posted by chadwix00
The brakes were pieced together. The rotors are 321mm x 30mm zimmerman cross drilled. The calipers are Porsche Boxster S which were sanded and repainted black with brembo decals to replace the porsche decals (made by brembo anyways). The brackets, hardware, and SS lines were picked up at EVOMS. I have cross drilled rotors for the rear but will not do anything else. Thanks!

exactly my kit. great looking by the way. how are you liking it? performance wise? what pads did you get?

here's a pic of mine:

http://homepage.mac.com/nunoborralho/newsite/files/page8-full-IMG_5677.JPG.jpg

http://homepage.mac.com/nunoborralho/newsite/files/page7-full-IMG_5547.JPG.jpg

chadwix00
01-22-2006, 10:20 AM
Originally posted by nmb
exactly my kit. great looking by the way. how are you liking it? performance wise? what pads did you get?



Thanks! I appreciate all the help you gave me when trying to piece this thing together! Performance wise, it's great. Stops hard first time, and then every time after that. A huge difference over stock. As for the brake pads, I got lucky and the calipers shipped with two sets of pads for free, one set brand new which was the set I used. They are ceramic pads but now I forget the brand of them.

E Fresh
01-22-2006, 06:32 PM
Awsome, now you just need some wheel locks to ensure the safety of the wheels and BBK.

A4Rob
01-22-2006, 07:47 PM
Originally posted by Jonathan ERS4
Awsome, now you just need some wheel locks to ensure the safety of the wheels and BBK.

That will not stop most thieves who REALLY want it

E Fresh
01-22-2006, 11:47 PM
Yea but it makes them work a little harder to get them.[;)]

scooter44
01-22-2006, 11:59 PM
your car is awesome man.

you have a PM!