View Full Version : Any AG M590 19x9.5 et40 owners with BBK?
850tgul
12-18-2017, 01:43 PM
Have these wheels and love them but discovered it's seemingly hard to fit any BBKs under them given their concavity. Was about to pull the trigger on the Q5 calipers but upon test fitting with ECS' Q5 template I found they weren't even close to fitting.
Curious if any owners of this specific wheel, AG M590 19x9.5 et40, have been able to fit any BBK or brake upgrade with them. If so, please note if you used any spacers and what size. Thx
MugelloB7RS4
12-18-2017, 01:57 PM
They fit on my B7 RS4 with 20mm spacers. Not sure how big of a brake kit you wanted, but 20mm just made it.
*Edit* Sorry, I lied. I had the M580's on my RS4. But I needed a 20mm spacer to clear the stock RS4 brakes.
850tgul
12-19-2017, 03:50 AM
No problem. Difficult part is the wheel is already a good bit wider than stock and very flush to the outer fender so I’m not sure anything more than a 5mm spacer would work anyway otherwise I’d now be ruining into fender rubbing issues. Seeing as these are very popular wheels just hoping someone has managed to fit some type of bbk with them.
mcjim
12-20-2017, 06:06 AM
I am having the same issue. I don't have the wheels yet, but I was planning on purchasing some M590s and now I don't think I will, plan on the Q5 brakes as well unless there's another solution.
rtl5009
12-20-2017, 06:25 AM
I have M510's same set up with Stoptech STR-60 380 kit. They fit, just barely .
blackfunk
12-20-2017, 06:51 AM
There's a thread floating around that has multiple wheel specs and different BBK's stating what fits, what doesn't and if a spacer was required. I'm too lazy to look for it now but maybe someone else can find it and direct you to it.
850tgul
12-20-2017, 07:59 AM
I have M510's same set up with Stoptech STR-60 380 kit. They fit, just barely .
I think it's the specific spoke design of the M590s that is the issue. I would think most 19x9.5 et 40 wheels would work.
I think it's the specific spoke design of the M590s that is the issue. I would think most 19x9.5 et 40 wheels would work.
If concave they will struggle more. But ya wheel design matters a lot. My 19x8.5 et32 and ch r clear q5 kit with tons of room but rotiform indt 19x8.5 et33 have a mm at most of clearance.