PDA

View Full Version : anyone replaced a window switch lately?



streamline
01-12-2006, 09:52 AM
anything i should look out for?

SeanF
01-12-2006, 10:29 AM
just makes sure when your taking out the switch cover and grab handle that you try and get it out without taking the two apart from eachother.

the clip holding them together is pretty weak, and once you break it once, they wont line up unless you replace them

and the switches themself are pretty easy to get out, unplug them, and leave them in the switch panel until you can get easy access to the back... and slide a small screwdriver in a slot on one side of the switch (from the back), and it will just pop out... (from the back)

streamline
01-12-2006, 10:33 AM
any tricks to removing switch cover clips?

SeanF
01-12-2006, 10:34 AM
ps, those panels are screwd to the back of the door panel...

to take that off, there are 2 screws on the black edge of the door, and one on the black liner of the grabhandle, once thats off, it will reveal 2 more screws that are to be removed to get the door panel off....