PDA

View Full Version : 310cc injectors-where to buy?



blacka41point8t
01-07-2006, 09:22 PM
as the title says where can I find some 310cc injectors for a descent price...usrally didn't have them they had the 300cc though. this will be for my pc16 setup.

turbojunkie
01-07-2006, 09:52 PM
only ones I've been able to find......

Don't know what the price range is on these injectors, so I have no idea if its a good price or not.

ATP (http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-VVW-076&Category_Code=BCS)

blacka41point8t
01-07-2006, 09:54 PM
damn 280

turbojunkie
01-07-2006, 09:59 PM
034 (http://www.034motorsport.com/index.php?cPath=24&osCsid=0e09d719c32871eaf36ada3af60617f9)

blacka41point8t
01-07-2006, 10:43 PM
hmm I dont see any 310cc ones on there?

quattro8239
01-07-2006, 10:47 PM
the ones that usralley sells are the right ones they're the bosch redtops 315cc for the pc16 setup but you also have to purchase an adj. fpr and a guage to set it at about 2.8 bar instead of 3. That is the route that everyone with pc16 pretty much goes.

blacka41point8t
01-07-2006, 11:07 PM
bosch or rc? what LB are the 310 and 315?

blacka41point8t
01-07-2006, 11:13 PM
wow im having a hard time finding these. I'm not even sure of a good price but I didn't think they would be like 85 a piece.

mike-2ptzero
01-08-2006, 12:04 AM
Originally posted by blacka41point8t
bosch or rc? what LB are the 310 and 315?


315cc = 30lbs
310cc = 29.5 lbs


The RC's tend to run lower then the 310cc they claim them to be. Some have said they flow more like 270cc.


If you run the 315's you might have to run around 2.6-2.8 bar at the fpr and fine tune the fpr from there since even at that it might not be perfect.

skiboard
01-08-2006, 07:12 AM
I was gonna go with Bosch 317CC (@3bar)(0 280 156 061)
but desided to go with other custom remapping software which I went with larger CCs.
so I got these lying around, if you like to buy it for $120 shipped let me know

one8t
01-08-2006, 07:35 AM
Ford Motorsport redtops, 30#, are $205 for 8 at Summit Racing or $159 for 4.

mike-2ptzero
01-08-2006, 12:12 PM
Originally posted by skiboard
I was gonna go with Bosch 317CC (@3bar)(0 280 156 061)
but desided to go with other custom remapping software which I went with larger CCs.
so I got these lying around, if you like to buy it for $120 shipped let me know

What did you end up going with and why would you need larger then 317cc for a K04?

quickglx
01-08-2006, 08:24 PM
Originally posted by one8t
Ford Motorsport redtops, 30#, are $205 for 8 at Summit Racing or $159 for 4.

I have a set of these, brand new/ unused, $150 shipped.