Log in

View Full Version : For Sale: Avant Garde M580 20x10 ET20



Gamble52
09-09-2017, 10:44 AM
I'm listing up my wheels because the car is now a commuter car. I don't want to keep on purchasing tires for it so the stock wheels went back on the car. At least with the stock wheels I can put commuter cheapy tires on it.

The wheels are Avant Garde M580 in a brushed gunmetal finish. Size is 20x10 ET20. They fit perfectly on a B8. I'm lowered on eibach prokit with stock struts. The tires are Yokohama S-Drive 255/30/20 and I don't rub at all, but all tires are shot and will need to be replaced. So you're basically buying the wheels.

The bad: the finish from the factory is pretty much a thin coat of paint. The paint chips off through regular driving and kick up of debris. The wheels are not curbed, and no the shop that installed the tires did not mess it up. The wheels already had the tires on before the chips started happening. I contacted AG and they said it's out of warranty and can talk about a re-spray for a discount. I said forget it because obviously it's manufacture defect and they're asking me to pay for another go around. I'm thinking what if it starts to chip again when it's out of warranty. If I were going to refinish it, I'd get them powder coated. If you find the right gray marker/touch up paint you can probably blend it in. Again no curb rash what so ever.

Anyways i'm located in the bay area and I don't want to ship. Asking $900 for the set. I can email or text pictures because i don't have an online hosting site.

Chris

swedensky
09-09-2017, 08:03 PM
Sent pm

Gamble52
09-10-2017, 09:51 PM
pm's returned

Gamble52
09-12-2017, 10:47 AM
lots of interest, but no commitment yet...still available.

Gamble52
09-19-2017, 01:31 PM
still available

Gamble52
10-04-2017, 10:44 AM
bump....still have them for sale.

Gamble52
12-07-2017, 02:31 PM
bump

AudiFamilyGuy06
12-07-2017, 02:59 PM
This doesn't seem possible. Not calling you a liar, but I ran the numbers on an offset comparison calculator. Stock S4 is 18 x 8 and because I couldn't find the exact offset I ran it with +35 and +45.

At the +35 going to a 20 x 10 with an ET of +20 would have the wheel stick out an additional 40 MM or 1.57 inches

at the +45 going to a 20 x 10 with an ET of +20 would have the wheel stick out an additional 50 MM or 1.97 inches

I can't fathom a B8 S4 with this size wheels AND be lowered.

Are you sure the ET is +20?

Joe

gman17
12-07-2017, 05:33 PM
Well he has an a5, which has extra space. Still tight though.

Gamble52
12-16-2017, 09:57 PM
This doesn't seem possible. Not calling you a liar, but I ran the numbers on an offset comparison calculator. Stock S4 is 18 x 8 and because I couldn't find the exact offset I ran it with +35 and +45.

At the +35 going to a 20 x 10 with an ET of +20 would have the wheel stick out an additional 40 MM or 1.57 inches

at the +45 going to a 20 x 10 with an ET of +20 would have the wheel stick out an additional 50 MM or 1.97 inches

I can't fathom a B8 S4 with this size wheels AND be lowered.

Are you sure the ET is +20?

Joe

The wheels fit perfect on the B8. The previous owner had them on a b7 rs4 and he didn't have issues at all. The 255 tires are the maximum width without rubbing though. I tried wider/flusher tires and they rubbed on dips. Anyways don't know what to tell you, but i will bet money that this setup does not rub on my B8 A5. Lowered only on stock struts and prokit drop.

VroomVroom
12-20-2017, 11:41 AM
I'm looking to step down to 20's from the OEM 21's on my SQ5. Can I toss some questions your way?

Can you confirm if hub rings are required/included?

The width & offset specs are confirmed @ 10" and ET20? (I have caliper fitment concerns up front.)

Wheel bolt specs? (Are bolts included?)

OEM center cap compatibility? (Are caps included?)

Would you be willing to separate from the tires? (In my case, I'd pick up from you, drop off at a powdercoat shop, and later add 275/40 tires.)