PDA

View Full Version : Wheels and Tires for my A4


Jacobgat4
06-24-2017, 08:31 AM
Hello all!

This is my first post here on Audizine and my question is this. I am looking to put a new set of wheels and tires on my car. It is a 2010 Audi A4 Quattro 2.0t and i was looking at either 18"x10" or 18"x11" wheels with either 275 wide tires or 295 wide tires and i was wondering if they would fit. If not, what is the widest setup that WOULD fit. Any help, opinions, and or recommendations are greatly appreciated!

Thanks!
-Jacob
Jacobgat4
06-26-2017, 03:10 PM
Anyone?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)
VMRWheels
06-26-2017, 03:38 PM
Anyone?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Typically, fender work is recommended for anything over 10" width. The most comfortable fit for the B8 A4 is 9.5 et35-45 width running 255/35 profile tires.


As for tire size, typical 10" width wheel runs between 275-295 width tires and 11" range from 285-315 width tires. Hope this helps!
Jacobgat4
06-26-2017, 09:03 PM
Typically, fender work is recommended for anything over 10" width. The most comfortable fit for the B8 A4 is 9.5 et35-45 width running 255/35 profile tires.


As for tire size, typical 10" width wheel runs between 275-295 width tires and 11" range from 285-315 width tires. Hope this helps!


Definitely helps! So you think i could run a 10" wide wheel with 285 or 295 wide tires without needing wheel spacers or fender flares or anything and still not rub?


EDIT:

Also if i DID have fender flares and spacers how wide could i run them. I dont know if im necessarily going for that look but im just curious lol. I know the VAD Design A4 had 20x12" on all 4 with 255 wide tires but it had fender flares and other work done but i was jist curious. Thanks in advance!

Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)
VMRWheels
06-27-2017, 03:49 PM
Definitely helps! So you think i could run a 10" wide wheel with 285 or 295 wide tires without needing wheel spacers or fender flares or anything and still not rub?


EDIT:

Also if i DID have fender flares and spacers how wide could i run them. I dont know if im necessarily going for that look but im just curious lol. I know the VAD Design A4 had 20x12" on all 4 with 255 wide tires but it had fender flares and other work done but i was jist curious. Thanks in advance!

Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)



It all depends on the offset. But if you're committed to doing fender work, 10" width shouldn't be any problems.

Feel free to PM me if you have any more questions.
Jacobgat4
06-29-2017, 08:28 AM
It all depends on the offset. But if you're committed to doing fender work, 10" width shouldn't be any problems.

Feel free to PM me if you have any more questions.



Thanks!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)