PDA

View Full Version : New BBK



JeffM1587
12-09-2005, 10:11 PM
Here is my new brake set up. they will go on as soon as i get new wheels that they will fit under

http://i11.photobucket.com/albums/a153/JeffMas/My%20Car/P1010357.jpg
http://i11.photobucket.com/albums/a153/JeffMas/My%20Car/P1010351.jpg
http://i11.photobucket.com/albums/a153/JeffMas/My%20Car/P1010350.jpg

scooter44
12-09-2005, 10:31 PM
those are huge!! nice.. make sure to post pics when u get them on. what wheels r u getting?

JeffM1587
12-09-2005, 10:35 PM
ssr comp or ssr gt 10's

bitterchild
12-09-2005, 10:39 PM
store them on the hub

sushi_turbo
12-09-2005, 11:09 PM
Nice! Those are going to look sweet esp with 5 spoke open wheels.

Did you order direct from Stoptech?

bitterchild
12-09-2005, 11:16 PM
they're used...

JeffM1587
12-09-2005, 11:19 PM
ya they are used but im gunna be getting new rotors and cleaning them up, i tired water and a tooth brush but it just made it worse

TurbousMaximus
12-09-2005, 11:44 PM
just clean up the calipers with break cleaner from an auto store...rotors should clean themselves after a few breaks.

JeffM1587
12-10-2005, 12:24 AM
yup thats what im going to do. ahh i need wheels

mmart6545
12-10-2005, 12:32 AM
Originally posted by JeffM1587
yup thats what im going to do. ahh i need wheels

I wouldnt spray brake cleaner on the calipers.

.aye four.
12-10-2005, 12:55 AM
Agree with mmart DO NOT use brake cleaner on the calipers it will mess up the coating on them. My friend found out the hard way with his EVO. Just use a mild degreaser such as dishwashing soap or diluted simple green.

JeffM1587
12-10-2005, 01:38 AM
ok ill go with dish soap, i though about that but just tried water and an old tooth brush

E Fresh
12-10-2005, 10:40 AM
Your going to love the braking when you get the kit on. Its makes a huge difference.

JeffM1587
12-10-2005, 11:36 AM
a bit ot from my first post but i didnt want to start a new thread, does anyone have the diagram for the install of a mbc? when my wastegate fell off it pulled some vac lines with it and im having trouble figuring out where they go

bitterchild
12-10-2005, 04:08 PM
nipple on the same axis as the adjustment knob goes to the boost source, the other goes to the wastegate actuator

JeffM1587
12-10-2005, 04:28 PM
sweet thanks, now i can get that all back, it was set up so that the n75 was still in there so im just gunna have to take it out

BarryT82
12-10-2005, 05:01 PM
what wheels do you have now? Wanna sell them?

JeffM1587
12-10-2005, 05:05 PM
i have stock ones and i got 5 of them all in great shape
http://i11.photobucket.com/albums/a153/JeffMas/My%20Car/B4ClearCorners.jpg