Exhaust sensors

[pez81]

Anyway he got any ideas where both exhaust sensors are? When I nodded my exhaust I got a warning light son I bought the milltek plugs but can only find one on the rear. Is there two on the back or just the one?

Sent from my XT1580 using Tapatalk

[RAF_S7]

You mean the exhaust flaps right?

There are definitely two on my S7. One above and forward of the rear left box (as you look from the back) and one above the rear right box - The valve is on one of the output pipes of the rear right between the chrome tip and the actual box.

I purchased the Miltek plugs as well, but not fitted them yet - too wet to lie on the ground LoL, but I never got any dashboard warning lights, though Ive seen the Vagcom logged errors.

[drive]

[madyspop]

You mean the exhaust flaps right?

There are definitely two on my S7. One above and forward of the rear left box (as you look from the back) and one above the rear right box - The valve is on one of the output pipes of the rear right between the chrome tip and the actual box.

I purchased the Miltek plugs as well, but not fitted them yet - too wet to lie on the ground LoL, but I never got any dashboard warning lights, though Ive seen the Vagcom logged errors.

[drive]

Can you post a picture of the Milltek sensors when possible? Are they just delete modules?

[RAF_S7]

Can you post a picture of the Milltek sensors when possible? Are they just delete modules?

They are just delete plugs.

Probably got a resistor inside them.

Have a look here (http://www.ebay.co.uk/itm/142090564522?_trksid=p2057872.m2749.l2648&ssPageName=STRK%3AMEBIDX%3AIT)

[pez81]

You mean the exhaust flaps right?

There are definitely two on my S7. One above and forward of the rear left box (as you look from the back) and one above the rear right box - The valve is on one of the output pipes of the rear right between the chrome tip and the actual box.

I purchased the Miltek plugs as well, but not fitted them yet - too wet to lie on the ground LoL, but I never got any dashboard warning lights, though Ive seen the Vagcom logged errors.

[drive]
Yeah that's what I mean. I've looked but can only see one. The fault was when I scanned it in obdeleven. It's gone now but the driver's side valve is the always open like the passenger side and I want it to be.

https://uploads.tapatalk-cdn.com/20170115/86e8047721e4f80dd49f40bbff233cbd.jpg

Sent from my XT1580 using Tapatalk

[RAF_S7]

You should be able to find the drivers side wire above the rear box towards the back, as the valve is directly on the output of one of the pipes.

[pez81]

You should be able to find the drivers side wire above the rear box towards the back, as the valve is directly on the output of one of the pipes.
Ok mate thanks I'll take another look

Sent from my XT1580 using Tapatalk

[madyspop]

Ok mate thanks I'll take another look

Sent from my XT1580 using Tapatalk

What exhaust do you have on your car that you need the delete modules?

[pez81]

What exhaust do you have on your car that you need the delete modules?
Stock but resonator delete and front resonators delete
I then uplougged the module so the valves are always open as one was rattling when closed. Remember my crow? The exhaust is made like shit, it had blown a hole as wasn't welded well from.the factory.

Sent from my XT1580 using Tapatalk