PDA

View Full Version : What else should i replace



Viqueens
12-12-2016, 05:31 PM
Hello, I have decided to take the challenge of putting in a new oil pump I'm going to school for an auto technician and I talked to my instructor he told me the right way to do it is take the whole engine out. I haven't decided if I'm going to do that yet or not. the reason I came here is to avoid another one of the fiascos so is there anything else I should replace or look at while I take the thing apart. Like when it is cold it has some problems shifting through the gears. (automatic I know [:/]). I have replaced a couple things when I put in a new cylinder head and gasket in and I can't remember what they were but I will try and remember, but is there anything at all to look for that could fail. the fewer times I tear into the car the better. THANKS

Bordom
12-12-2016, 09:48 PM
Pull the engine/Trans together and do a fluid flush on the unit.

You might as well reseal the entire motor if it's never been done

Sent from my SM-G935W8 using Tapatalk

Viqueens
12-13-2016, 07:55 PM
is there a thread on here that tells me the correct procedure to do a fluid flush and reseal?